Weidmüller Cable inlet
weidmuller cable inlet overview for industrial enclosures
This category covers everything that brings cables cleanly into cabinets: individual glands, multi-cable plates, split frames for pre-terminated leads, plus the nuts, seals and reducers that finish the hole. Weidmüller structures the range by thread/size (M12–M63 plus PG and NPT), material (polyamide, nickel-plated brass, stainless), and function (standard, EMC, high-temperature, hygienic). Typical buyers are panel builders, machine OEMs, and MRO teams who need repeatable, IP-rated entries that match common knockouts and enclosure wall thicknesses.
weidmuller cable glands sizes and materials
Core sellers are M20 and M25 in PA6 (light grey/black) for control panels; brass glands in M16–M32 handle tougher environments and tighter clamping. Stainless hygienic styles serve food/chem lines with smooth geometry and blue seals. EMC glands add a 360° braid clamp for shield continuity. Strain-relief types lock the jacket, and flex (spiral) variants protect against bend fatigue. Expect clamping ranges clearly printed on caps; most distributors stock bagged tens for PA and fives for metal, with locknuts and sealing washers in matching threads.
weidmuller cable entry systems and plates
For dense wiring, one rectangular cutout accepts modular plates that feed 4–30 cables through grommets. Choose solid grommets for new builds, split grommets when you must pass pre-terminated connectors. Frames land at common cutouts (e.g., 36×112 mm), with corner screws and captive seals to maintain IP65–IP66. Multi-hole inserts let you route several small diameters through one plate to save space and cost; blank inserts plug unused positions to hold the rating after future changes.
weidmuller sealing cable entries for harsh zones
When washdown or dust is non-negotiable, order IP68/69K glands with integrated O-rings and tapered seals; add a flat or conical sealing washer for thin sheet. Temperature bands typically run −40…+100 °C for PA and up to +200 °C for silicone-sealed metal. In ATEX/Ex areas, Weidmüller offers certified variants—keep the label and paperwork with the panel dossier to avoid re-inspection delays.
Key features and options
- Threads: M12–M63, PG7–PG29, plus NPT on request; reducers/enlargers cover legacy holes.
- Clamping spans: e.g., M20 6–12 mm and 7–13 mm; check print before picking to avoid returns.
- IP classes: IP54 up to IP69K with the right washer and torque; EMC versions include braid spring.
- Materials/finishes: PA6 (light grey RAL 7035 or black), nickel-plated brass, A2/A4 stainless; hygienic blue seals.
- Accessories: locknuts, earth tags, sealing/EDPM washers, blind plugs, snap-in strain reliefs, identification rings.
- Kits: project bags pre-packed by size simplify kitting on the shop floor.
Applications and compatibility
Use in motor control centers, packaging machines, HVAC rooftops, conveyors, and water treatment panels. Glands pair naturally with Weidmüller terminal blocks, markers, TS35 DIN rails, and wire duct. If you’re planning network or sensor runs, add RJ45/field-bus couplers and ferrules to the same order. For cable entries on stainless boxes, match stainless hardware to prevent galvanic staining over time. Most installers treat these as weidmuller electrical cable access components that must land right the first time to keep IP and EMC intact.
Integration with other Weidmüller products
The same M20/M25 knockout schema aligns with Weidmüller enclosure accessories; marker carriers snap next to entries for clear labeling. EMC glands bond neatly to PE terminal rails; use the brand’s earth terminals and copper braid for a low-impedance path. Split frames leave space for cable ducts beneath, so your routing stays tidy from entry to terminal block.
Selection criteria for B2B clients
- Environment/IP. Indoor panels go PA6 IP68; washdown/chem lines choose stainless/hygienic with IP69K.
- Cable OD and clamping. Match OD to the specific clamping span printed on the cap to avoid jacket creep or leaks.
- Thread and wall thickness. M20/M25 dominate; use long-thread bodies on double-wall doors or add extension sleeves.
- EMC needs. If shields must terminate 360°, specify EMC glands and plan braid length at the entry.
- Serviceability. For pre-terminated cords, use split glands/frames; keeps warranty stickers untouched.
- Bill completeness. Add locknuts, sealing washers, blind plugs, and a spare grommet set so commissioning doesn’t stall.
Advantages of working with Bankoflamps
You get custom B2B pricing with a named account manager and real-time stock across EU warehouses. Quotes come back fast—typically within about an hour—and we accept orders by EAN/MPN. Price lists are downloadable and current; order status and lead times are tracked throughout. Approved clients can use post-payment terms up to 30 days. We consolidate shipments to cut freight and keep pricing valid through set dates. We actively serve France, the Baltics, Germany, Spain, Italy, Belgium, and the Netherlands.