Viokef Table lamps

Under-spec’d table pieces waste time later: wrong optics on glossy desks, drivers that buzz on phase dimmers, sloppy strain relief that fails housekeeping checks. Viokef solves the boring but crucial details—optics, drivers, wiring, and finishes—so desk, bedside, and lounge lamps behave like proper commercial luminaires, not consumer decor.

viokef table lamps performance ranges and build choices

Specifiers usually land these in 300–1200 lm bands with CRI 90 available, but output alone doesn’t make a good desk piece. Beam shape matters: opal diffusers for ambient tables, micro-prismatic optics to keep luminance below glare thresholds over glossy tops, and tight task beams when documents or textiles need punch. CCT sets cover 2700/3000/3500/4000 K; many families hold color within 3 SDCM so mixed batches don’t drift across a floor. Bodies are metal or glass with weighted bases sized to pass tip tests on shallow shelves; cable exits use proper strain-relief and grommets matched to jacket Ø, which stops terminations from carrying mechanical load. For maintenance, fasteners are captive and pads under the base are replaceable—small touches that limit room downtime. When you schedule viokef table lamps, lock lumen bin, optic type, CCT/CRI, and cord length by area so replenishment doesn’t change appearance or lux.

viokef decorative desk lights optics and finishes for front-of-house

Front-of-house wants visual calm and controlled reflections. viokef decorative desk lights pair uniform opal cylinders for soft halo lighting with micro-prismatic options that flatten high-angle brightness over marble or lacquered surfaces. Glare is managed by hidden light sources and cutoff rings; you can seat laptops nearby without veiling reflections. Finish sets—matte black/white, brushed brass, satin nickel, tint glass—repeat across families so reception, lounge, and bar zones keep one palette. Engineering isn’t afterthought: powder coats resist cleaning agents, glass edges are polished to avoid chipping in housekeeping, and felt or silicone feet are stocked as spares. Where signage or wayfinding sits close, neutral-white 3500–4000 K keeps printed color true; for hospitality warmth, 2700–3000 K avoids amber cast on skin tones.

viokef led table luminaires drivers, dimming, and flicker control

Power quality is predictable: PF ≥0.9 at rated load, THD ≤15 %, surge immunity suited to commercial boards (typ. 2 kV L–N / 4 kV L–PE). Ripple stays ≤5–10 % so photos and video don’t band; many drivers publish PstLM/SVM where media capture matters. Control choices share one mechanical envelope—on/off for back-office, phase-cut for light refurbishments, 1–10 V inline desk controls, and DALI-2 for meeting spaces with scenes. Minimum stable dim levels are stated (often 1–3 % on DALI, 5–10 % on 1–10 V), fade times feel natural, and “dim-to-off” behaviour is documented so you can plan sensor logic without guesswork. Thermal points (tc) are printed on the gear; cap temperatures remain sane under shades, and lifetime is backed by LM-80/TM-21 on the LED packages—useful when estates track L80/B10 targets. When you request viokef led table luminaires, specify protocol, curve (log/linear), minimum dim level, and inrush per circuit to protect RCBO rows.

viokef bedside lamps hospitality ergonomics and electrics

Guest-room kits combine ambient and task in one footprint: warm 2700–3000 K ambient for comfort plus a tight, glare-cut reading head on a stable arm. Controls are where users expect them—base rocker or capacitive touch for ambient; a discrete switch on the task head that remembers last level. USB-A/C charging lives in the base on selected models with true 5 V regulation, surge-protected to avoid phone complaints. Cable exits are strain-relieved and routed to survive mattress and bedside cleaning; shades remove without tools, and spares are coded by finish to keep rooms visually consistent after swaps. When listing viokef bedside lamps, nail switch type and location, charger presence, shade finish, and cord length—small spec notes that save hours during fit-out.

viokef modern table lighting maintenance and safety details

Commercial duty means repeatable service: accessible lamp covers, replace-and-reuse diffusers, and documented glow-wire values (typically 650–850 °C per family). Finishes resist fingerprints; anti-scuff pads and spare fasteners arrive in the same bag. Facilities like viokef modern table lighting because polarity markings and test access points sit where they should, making night-shift inspections quick.

viokef reading lamps task beams and user control

Focused work needs controlled pools of light. viokef reading lamps offer 30–60° beams with cut-off rings that hide the emitter from seated positions, two or three fixed steps plus long-press dim, and heads that hold aim without drift. CRI 90 variants keep paper and textiles accurate at 3000–4000 K.

viokef indoor table fixtures wiring, accessories, and logistics

Cords arrive with EU plugs; hard-wire tails are available where furniture power modules demand it. Inline switches, label windows for asset codes, and spare shades/pads are stocked by EAN so housekeeping swaps don’t change looks across a floor. Procurement tags viokef indoor table fixtures by optic, output, control, finish, cord length, and spare set for clean reordering.

Product range and series overview

• Outputs 300–1200 lm; CRI 80/90; CCT 2700/3000/3500/4000 K with 3 SDCM consistency.
• Optics opal, micro-prism, and task beams (30–60°) with glare control near glossy worktops.
• Controls on/off, phase, inline 1–10 V, DALI-2; minimum levels and fade times documented.
• Mechanics weighted bases, replaceable pads, captive fasteners; metal/glass bodies.
• Electrics IP20 interiors, PF ≥0.9, THD ≤15 %, low ripple; EU plugs or hard-wire tails.
• Options USB-A/C bases, twin-head ambient+task, spare shades and hardware.

Technical specifications and standards that matter

Supply 220–240 V AC, 50/60 Hz; drivers IEC/EN 61347-1/-2-13; control EN 62384; EMC EN 55015 / EN 61000-3-2/-3. Ingress IP20; glow-wire per model; wiring 0.5…2.5 mm² with 8–10 mm strip; torque per label. LED data backed by LM-80/TM-21; publish L80/B10 and ambient where lifecycle is audited.

Selection criteria for B2B buyers

1. Define task and target lux → choose optic (opal/prismatic/task) and lumen band.
2. Fix CCT/CRI by area; attach L80/B10 and tc where estates track lifetime.
3. Choose control protocol and dim curve; confirm minimum dim level and inrush.
4. Lock ergonomics: switch type/position, head articulation, cord length, furniture protection.
5. Map spares by EAN (shades, pads, chargers) so replacements don’t break visual unity.

How Bankoflamps handles Viokef table-lamp orders

You get pricing tailored to the request, quick quote turnarounds by EAN/MPN, and live EU stock before confirming. The client portal shows lead times, tracks shipments, and offers downloadable price lists with validity dates you can plan against. Trusted customers can use post-payment up to 30 days. We consolidate consignments so lamps, control variants, cords/plugs, spare shades, pads, and labels arrive area-kitted; an account manager cross-checks finish codes, control type, cord length, and accessory sets against your documents so deliveries are ready to use across France, the Baltics, Germany, Spain, Italy, Belgium, and the Netherlands.