Viokef Lighting accessories
Specifying accessories is where installs either stay predictable or drift. With Viokef you get lamp-side parts that respect real constraints: cable ODs that match glands, thermal limits printed on the part, and IP kits that still seal after maintenance. Below is a practical, assortment-first map you can drop into schedules without guesswork.
viokef lighting accessories scope and field use
The viokef lighting accessories family covers what sits between driver and trim: caps/bases for hot canopies, sealed plugs for façades, gaskets and glands for wet rooms, strain-relief and through-wiring blocks for rows, plus repair pieces for imperfect cutouts. Crews sort by IP class, temperature rating, and conductor window so swaps don’t disturb photometry or ingress protection.
viokef mounting kits room packs and retrofit sets
Room packs combine the exact bracket, spacer ring (2–10 mm), gasket set, screws, and label windows for each ceiling type—mineral grid, plasterboard, or metal trays. Using viokef mounting kits keeps focal height, bezel gaps, and torque targets consistent from space to space.
viokef lamp holders thermal classes and caps
Ceramic bodies cover hot zones around 200–250 °C; high-temp polymers save mass where ambient stays lower. The viokef lamp holders assortment spans E27/E14, GU10/GU5.3, G9, GX53, G13/G5, and R7s with anti-rotation tabs, earth lugs, and captive screws. Tails arrive pre-terminated (0.5…1.0 mm²; strip 8–10 mm) so pull tests pass on lifts.
viokef lighting connectors quick coupling and IP ratings
Keyed 2–5-pole plugs—IP20 for ceilings and IP44/IP65 sealed pairs for canopies and exterior heads—speed finishing and keep polarity straight. Marked cores separate mains from 1–10 V/DALI. Specifying viokef lighting connectors by pole count, seal class, and cable Ø ensures strain goes to the clamp, not the terminal.
viokef installation accessories gaskets glands and adapters
Bathroom and housekeeping points use IP44 gasket rings and compression glands sized to thread and jacket. Adapter plates rescue oversize cutouts; repair collars tidy chipped edges; SELV barriers preserve clearances inside shared boxes. Stock viokef installation accessories to the same color codes used on drawings for frictionless QA.
viokef spare parts for lights optics drivers and seals
Driver trays (CC/CV), emergency modules, opal/prismatic diffusers, reflectors, lens packs, and seal kits are tied to specific fixtures so beam shape, UGR, and IP survive maintenance. Keeping viokef spare parts for lights matched by EAN to each luminaire family prevents mixed trims or color shifts after replacements.
viokef lighting components wiring blocks and strain relief
Loop-through blocks with distinct bays for L/N/PE and dimming lines, cord grips, and clamp-style strain relief keep canopies neat and auditable. Label windows accept circuit IDs and test dates. Choose viokef lighting components by conductor range (0.5…2.5 mm²) and rated torque (typically 0.4–0.8 Nm) to land repeatable terminations.
Technical specifications and standards that matter
Supply interfaces: 230 V AC mains; SELV 12/24 V for controls; 1–10 V/DALI cores color-distinct. Ingress per IEC 60529: IP20 ceilings, IP44/IP65 with listed kits. Fire: glow-wire 650–850 °C (IEC 60695-2-11). Wiring windows 0.5…2.5 mm²; strip 8–10 mm; typical torque 0.4–0.8 Nm (device label prevails). Operating −20…+50 °C typical; observe tc on gear trays. Materials include LSZH options (IEC 60754/61034) for escape routes.
Applications and compatibility
• Offices/hospitality: keyed plugs for modular ceilings; shallow GX53 bases in tight voids; gasket sets in wet areas.
• Education/healthcare: LSZH plastics, tamper-resistant caps, clear label windows for audits.
• Logistics/plant: ceramic caps in hot bays; IP65 sealed connectors and anti-vibration clips on high bays.
Accessories align with Viokef luminaires and common device grids, so trims sit true and seals remain intact after service.
Integration with other brand products
Accessories interface cleanly with Viokef downlights, panels, and bulkheads; sealed plugs share gland threads with typical installation boxes; wiring blocks and labels follow the same spacing and marker scheme used across the brand’s fixtures and ceiling adapters.
Selection criteria for B2B buyers
- Fix environment: target IP/IK and cleaning regime, then pick gasket/seal sets and material class.
- Choose cap/holder by optic and temperature band (ceramic vs high-temp polymer).
- Define wiring: conductor size, loop-through need, dimming pairs; match cable Ø to gland threads.
- Lock mounting: bracket type, spacer height, repair/adapter plates where legacy cutouts exist.
- Tie spares to fixture EANs: drivers, optics, seals, and connectors pre-boxed per room type.
How Bankoflamps supports this category end-to-end
Bankoflamps aligns procurement to your commissioning windows and provides project-specific pricing with quick quote turnaround by EAN/MPN. The portal shows live EU stock, current lead times, shipment tracking, and lets you download price lists with validity periods for planning. Trusted clients can use post-payment terms up to 30 days. Deliveries are consolidated so brackets, holders, connectors, gaskets, glands, wiring blocks, and labels arrive kitted by area, and your account manager checks IP targets, material classes, conductor ranges, thread sizes, and labeling against your documents—keeping consignments ready for immediate use across France, the Baltics, Germany, Spain, Italy, Belgium, and the Netherlands.