Viokef Floor lamps

Floor pieces only look simple. In practice you’re juggling glare on glossy floors, base stability, cable routing that survives cleaning, and drivers that dim cleanly with the room’s controls. Viokef’s ranges are built for commercial duty—office lounges, hotels, libraries—where appearance, ergonomics, and electrical discipline all matter.

viokef floor lamps performance, optics, and stability

For living areas that double as work zones, viokef floor lamps typically ship in 900–5 000 lm bands with CRI 90 options and CCT sets at 2700/3000/3500/4000 K (≤3 SDCM for batch consistency). Optics split into opal diffusers for ambient wash, micro-prismatic shades to tame high-angle luminance, and task heads with 30–60° beams. Weighted bases meet tip-resistance targets on smooth floors; felt or silicone pads protect finishes. Cable exits use proper strain relief so the terminal block doesn’t carry load, and inline or foot switches are placed away from chair legs. Drivers quote PF ≥0.9, THD ≤15 %, ripple ≤5–10 % to avoid camera banding in meeting spaces.

viokef standing lamps controls, drivers, and user ergonomics

Where spaces run scenes, viokef standing lamps are offered with on/off, phase-cut, 1–10 V inline dimmers, or DALI-2 desk modules sharing one mechanical envelope. Minimum stable levels are documented (≈1–3 % on DALI, 5–10 % on 1–10 V) and fade times feel natural for hospitality. Thermal points (tc) are printed on the driver; void ventilation around shades is specified so lifetime projections (LM-80/TM-21 based) don’t collapse in warm corners. Hardware touches—captive fasteners, replaceable diffusers, strain-relieved cords at 1.8–2.5 m—keep housekeeping quick.

viokef led floor lighting glare control near glossy surfaces

Open offices and lobbies often combine polished stone and glass—both unforgiving with glare. With viokef led floor lighting, micro-prism or baffle kits keep luminance in check above 65°; upward/direct models balance ceiling brightness with task zones to hit UGR targets. For camera-heavy spaces, flicker metrics (PstLM/SVM) or ripple percentages are available; surge immunity is typically 2 kV (L-N) / 4 kV (L-PE) for clean behaviour on mixed circuits. Inrush figures are published so RCBO rows don’t nuisance trip when many units share a way.

viokef decorative floor luminaires finishes, hygiene, and service parts

Front-of-house needs refined finishes that survive cleaning. viokef decorative floor luminaires are offered in matte black/white, brushed brass, satin nickel, and tinted glass; powder coats resist common detergents and fingerprints. Shade edges are polished to reduce chipping, and spare shade/fastener packs are coded by finish so replenishment doesn’t drift in colour or sheen. Where wayfinding sits close by, 3500–4000 K keeps printed media neutral; guest areas usually land at 2700–3000 K.

viokef modern standing lights task+ambient combinations for hospitality

Many models blend a warm ambient dome with a second, narrow beam for reading. Specifying viokef modern standing lights with independent switching (base rocker plus head switch) stops late-night complaints and lets facilities swap a head without touching the main body. USB-A/C bases are available on selected SKUs with true 5 V regulation and surge protection.

viokef indoor floor fixtures wiring, bases, and logistics

To keep installs tidy, viokef indoor floor fixtures arrive with EU plugs or ferrule-ready tails for furniture feeds; base cavities manage slack and label windows carry asset IDs. Tip-alarm options (tilt sensors) are available for public libraries and kids’ areas where extra vigilance helps.

viokef freestanding lamps applications and mounting notes

Libraries and lounges prefer 3000–3500 K with CRI 90 for paper and textiles; reception lounges benefit from lower mounting of shades to cut veiling reflections. When planning viokef freestanding lamps, lock cord length by zone, define switch type/position, and record L80/B10 plus tc in the schedule to keep audits predictable.

Technical specifications and standards that matter

Supply 220–240 V AC, 50/60 Hz; drivers to IEC/EN 61347-1/-2-13; control performance EN 62384; EMC EN 55015 and EN 61000-3-2/-3. Typical ingress IP20; glow-wire per family (often 650–850 °C). LED packages backed by LM-80 with TM-21 projections. Wiring 0.5…2.5 mm²; strip 8–10 mm; torque per device label. Keep 7.5–10 mm breathing space around warm gear; publish inrush (A/µs) where many fittings share one breaker.

Selection criteria for B2B buyers

1. Target lux/UGR → choose optic (opal, micro-prism, task head) and lumen band.
2. Lock CCT/CRI per zone; attach L80/B10 and tc limits.
3. Choose control (on/off, phase, 1–10 V, DALI-2) and minimum dim level; check inrush vs board.
4. Fix ergonomics: base mass/diameter, switch location, cord length, furniture-safe pads.
5. Map spares by EAN (shades, pads, diffusers) so refreshes don’t mix finishes across a floor.

Bankoflamps service model for Viokef floor ranges

You receive pricing tailored to your request, quick quote turnarounds by EAN/MPN, and real-time EU stock before ordering. Through the portal, check current lead times, track shipments, and download price lists with validity windows you can plan against. Trusted clients can purchase with post-payment up to 30 days. We consolidate consignments so luminaires, control variants, shades, pads, plugs, and labels arrive kitted by area, and an account manager verifies optic/output codes, control types, inrush data, finish sets, and wiring details against your documents—keeping deliveries ready to use across France, the Baltics, Germany, Spain, Italy, Belgium, and the Netherlands.