Viokef Flashlights, batteries and acessories

Field teams judge torches like any other tool: beam shape you can trust, runtime at the output you’ll actually use, housings that survive knocks and washdowns, and charging that doesn’t slow a shift. Viokef’s lineup splits cleanly into inspection beams, area work lights, and compact EDC models—each with ANSI FL1 data, clear ingress/impact ratings, and spare-cell options for cold or long nights.

viokef flashlights and batteries use cases and performance bands

The viokef flashlights and batteries range covers pen and right-angle inspection lights (150–400 lm, high-CRI for color-true wiring), tight-beam spotlights for ceiling voids and façades (600–1200 lm; 10–20 kcd), and broad work lights for hands-free tasks (800–2500 lm, wide 120° optics). Expect published ANSI FL1 runtime, impact drops (1–2 m), and IP54–IP68 variants; selecting viokef flashlights and batteries by lumen class, candela, and IP/IK makes sign-off straightforward.

viokef led flashlights optics, durability, and flicker notes

Neutral-white emitters (≈4000–5000 K) aid cable color ID; ≥90 CRI options exist for panel work. TIR lenses give uniform close-up beams; smooth reflectors carry throw. Bodies are anodized aluminum or reinforced polymer with sealed switches; PWM frequency is high enough to avoid camera banding in documentation. When you stock viokef led flashlights, record CCT/CRI, beam profile (spill angle and center candela), and IP/IK for each model.

viokef rechargeable torches charging standards and fleet practice

Docking cradles with 12/24 V inputs or USB-C PD keep fleets topped without bespoke power bricks. Smart charge (CC/CV with NTC) protects Li-ion; typical full charge for 18650/21700 is 3–5 h. Cradles list screw centers for van racking; status LEDs show charge and fault. Technicians favor viokef rechargeable torches where the charge interface is standardized and spare cells are barcode-tracked.

viokef portable lighting area heads and site hardware

Tripod-ready work lights deliver 1000–4000 lm with swivel frames, rubber bumpers, and magnetic/Hook mounts rated with a stated pull force. IP54/IP65 bodies tolerate washdown; dual-power SKUs accept both mains and DC sleds for generator changeovers. Spec viokef portable lighting by beam width, mounting option, and supply mode (AC only vs hybrid) so tasks near boards and mezzanines are covered.

viokef flashlight accessories mounts, filters, and service sets

Helmet clips, panel-edge clamps, holsters, traffic wands, diffusers, and colored filters keep kits functional across tasks, while O-ring and lens packs extend service life. Magnetic charge leads ship with strain-relief sleeves, and tether points are rated. Bundle viokef flashlight accessories with each team’s kit so replacements don’t stall night work.

viokef battery packs chemistries, swappability, and safety

Li-ion 18650/21700 packs carry UN38.3 papers, protection PCBs (OVP/UVP/short-circuit), and real Wh labels; low-temp shifts can run LSD Ni-MH AA/AAA where trickle and cold starts matter. Hot-swap sleds are keyed to prevent mismatch; gas-gauge ICs expose SoC/SoH on selected models. Stock viokef battery packs by chemistry, connector, and Wh class, and fix a rotation/inspection cadence in the method statement.

viokef handheld lights controls, UI logic, and ergonomics

Two or three fixed output steps plus momentary turbo keep operation glove-friendly; lockout prevents pocket activation. Tail-stand or magnet bases support vertical work; knurling and anti-roll flats protect lenses. Choosing viokef handheld lights by UI map (press/hold behavior), switch position, and mounting convenience makes crews faster on site.

Technical specifications and standards that matter

ANSI FL1 for lumen, candela, runtime, impact, and ingress; IP per IEC 60529; chargers to IEC 62368-1. Typical operating range −10…+40 °C; PWM ≥ 20 kHz on inspection beams; beam files (IES) available on select spot models for predicted lux at 5–15 m. Battery guidance: Li-ion charge 0…+45 °C, discharge −20…+60 °C; store 30–50 % SoC cool and dry. Mounts list screw threads (¼-20 UNC) and rated pull for magnets.

Selection criteria for B2B buyers

1. Fix task distance and target lux → pick lumen/candela and optic.
2. Lock runtime at the required step (not “moonlight”), aligned to shift length.
3. Choose charging model (USB-C vs dock), cradle placement, and spare-cell policy.
4. Set durability: IP/impact class, solvent resistance for cleaning, and glove-friendly UI.
5. Publish kit contents per crew: light type, battery class, mounts, service seals, and labels.

How Bankoflamps handles Viokef portable-lighting orders

You receive pricing tailored to your request, quick quote turnaround by EAN/MPN, and live EU stock visibility before placing orders. The client portal shows current lead times, tracks shipments, and provides downloadable price lists with validity periods for planning. Trusted customers can work with post-payment terms up to 30 days. We consolidate consignments so lights, docks/chargers, mounts, spare cells, and service seals arrive kit-boxed by team or area; an account manager verifies IP/IK targets, chemistry, charging standard, mount hardware, and labeling against your documents to keep deliveries ready for immediate use across France, the Baltics, Germany, Spain, Italy, Belgium, and the Netherlands.