Vimar Plugs

vimar plugs and distributors range and deployment

Under the vimar plugs and distributors umbrella you’ll find handheld connectors (straight/angled), interlocked outlets, and compact boards that pair sockets with MCB/RCD protection. Color and keying match voltage/frequency families, so mis-mating across 230/400 V circuits is avoided. Typical environments span pop-up kitchens, events, workshops, and service risers.

vimar power plugs ratings, keys, and cord grips

The vimar power plugs line covers 16/32/63 A frames in 2P+E, 3P+E, and 3P+N+E, keyed to IEC 60309 color codes (blue 230 V, red 400 V), with IP44 splash or IP67 washdown builds. Cable clamps accept common jacket diameters (≈9–28 mm depending on frame), strain relief is rated, and terminals take 1.5…25 mm² Cu with printed strip lengths and torque windows for repeatable pull tests.

vimar distributor sockets portable boards and pillars

For site power and markets, vimar distributor sockets bundle inlet, ways with MCB/RCBOs, and optional Type 2 SPDs in rugged enclosures (IK08 typical). Transparent windows leave device flags readable; engraved legends survive cleaning. Wall, floor, or freestanding pillars are available, with pre-drilled gland plates to keep bend radius and IP intact.

vimar plug connectors mechanics, contacts, and EMC

Installers favor vimar plug connectors with nickel-plated pins, high contact pressure, and captive screws that don’t wander into the dust. Bodies use PA or rubberized shells for grip; gaskets are replaceable; and ferrule-friendly cages keep strands captive. Where VFDs run nearby, braid clamps and 360° bonding rings are offered to tame common-mode noise on screened cords.

vimar electrical distributors protection coordination and IO

Compact boards in the vimar electrical distributors family integrate RCD/RCBO protection, clear I/O labeling, and padlock points for LOTO. Busbars and neutral links are sized for the frame, and spare way covers are included. Earth studs, PE continuity symbols, and test tabs sit where commissioning teams can actually reach them.

vimar modular plug systems configuration and serviceability

With vimar modular plug systems, outlets, indicators, emergency-stop, and metering modules snap into a shared footprint. You can assemble a two- or three-circuit set with interlocks, lighted status, and a master RCD without changing enclosure geometry. Spare modules ship with seals and screws, so mid-shift swaps don’t compromise the IP rating.

vimar industrial socket outlets interlocks, IP/IK, and switching

Plant rooms and loading docks lean on vimar industrial socket outlets with mechanical interlocks (plug can’t be live until fully inserted), switch-disconnects, and door interlocks for safety. IP44/IP67 options handle spray or washdown; IK08 housings resist knocks; angled entries reduce cable strain in tight corners. Labels print current, voltage, and device curve right on the face.

Technical specifications and standards that matter

Supply families 230/400 V AC, 50/60 Hz; current frames 16/32/63 A as marked; terminals 1.5…25 mm² Cu; strip 8–12 mm; torque per device label. Ingress to IEC 60529 (IP44/IP67 by model); impact to IEC 62262 (IK08 typical); plugs/outlets to IEC 60309; assemblies to IEC/EN 61439 where applicable. Ensure RCD types (AC/A/F) match load profiles with LED drivers and drives; publish SPD class where required.

Applications and compatibility

Events and hospitality: portable boards with IP44 sockets and transparent device windows. Logistics/industrial: interlocked IP67 outlets and red 400 V frames near machinery, with braided-screen support for EMC. Retail and pop-ups: compact pillars with mixed 230 V ways, clear labeling, and quick wall-fix patterns. All items align with Vimar boards, markers, and trunking so glands, labels, and conductor sizes stay consistent.

Selection checklist for B2B buyers

1. Fix voltage/current and duty (16/32/63 A; 230/400 V), then choose IP/IK per location.
2. Decide on interlock/switch-disconnect and RCD/RCBO type; document curves and ΔI
3. Match cord Ø to clamp range; specify conductor size and ferrules; lock torque/strip rules.
4. For boards, predefine way count, SPD class, gland threads, and labeling.
5. Set spare kits: gaskets, screws, caps, and a replacement insert per circuit to avoid downtime.

Bankoflamps supply workflow for plug and distribution gear

We price per job and return quotes quickly by EAN/MPN, with live EU stock visible before you place orders. The portal tracks current lead times and shipments, and lets you download up-to-date price lists with validity dates for planning. Trusted accounts can use post-payment terms up to 30 days. We consolidate deliveries so plugs, outlets, boards, interlocks, gaskets, glands, and labels arrive kitted by area, and your account manager checks current ratings, RCD types, IP/IK classes, gland threads, and marking against your documents—keeping consignments ready for immediate use across France, the Baltics, Germany, Spain, Italy, Belgium, and the Netherlands.