Vimar Luminaire accessories
Lighting teams keep Vimar in the spec when they want lamp-side parts that actually fit, hold IP after maintenance, and share one geometry with the brand’s plates and channels. The range below maps what you stock for canopies, grids, façades, and high bays—by function, temperature class, IP/IK, and wiring windows—so night-shift swaps don’t derail photometry or safety.
vimar luminaire accessories portfolio and use on site
The vimar luminaire accessories family covers what lives between driver and trim: lamp holders and bases, quick connectors, gaskets and glands, bracketry, through-wiring blocks, and label windows. Temperature classes run from 105 °C polymers to 200–250 °C ceramics; ingress options span IP20 ceilings to IP44/IP65 kits for washrooms and exterior heads. Terminals typically accept 0.5…2.5 mm² Cu with 8–10 mm strip and finger-safe cages. Curate by IP, thermal class, and jacket Ø so each fixture family has a defined spare set.
vimar lighting accessories for downlights, lines, and façades
Under vimar lighting accessories you’ll find ceiling springs and anti-rotation claws for plasterboard, retaining collars for shades, compression glands sized to 6–12 mm jacket Ø, and anti-vibration clips for sports halls or transit corridors. Linear runs use loop-through blocks to daisy-chain rows while keeping SELV separated from mains with colored dividers.
vimar mounting systems brackets, plates, and repair hardware
The vimar mounting systems line includes adapter plates for oversize cutouts, spacer rings (2–10 mm) to correct proud plaster, repair collars to hide chipped edges, and universal brackets that maintain focal height for optics. Stainless options exist for chlorinated or coastal sites; load data and screw lengths are printed so torque lands first time.
vimar connectors and adapters quick-coupling and I/O options
For fast finishing and reliable service, vimar connectors and adapters cover 2–5-pole IP20 ceiling plugs, IP65 sealed pairs for canopies/façades, and keyed variants that separate mains from 1–10 V or DALI cores. Through-feed blocks support L/N/PE plus control; polarity and control pins are embossed. RJ45/TV/SAT plate adapters share the same 55–71 mm grid when data sits beside lighting on one frame.
vimar spare parts for luminaires optics, drivers, and seals
Spare trays include drivers (CC/CV), emergency modules, reflectors, opal/prismatic diffusers, lens packs, seal kits, and aiming brackets. With vimar spare parts for luminaires, each EAN ties to a room type and cutout, so replacements preserve beam shape, UGR, and IP after service. Seal kits include new screws and torque notes to keep ratings intact.
vimar installation accessories gaskets, glands, and SELV barriers
Bathroom heads and housekeeping areas rely on IP44 gasket rings, foam or silicone seals, and compression glands that match gland-plate threads on Vimar boxes. vimar installation accessories also include color-coded SELV barriers, label windows, and cord grips; these keep segregation clear in mixed mains/SELV canopies and leave neat, auditable terminations.
vimar wiring components terminal blocks and strain relief
Ceiling canopies and gear trays use through-wiring blocks with distinct bays for L/N/PE and dimming pairs, plus bridges for loop-in/loop-out. Strain-relief clamps and cord grips take the pull, not the terminal. Stock vimar wiring components by pole count, conductor range, and rated torque (typically 0.4–0.8 Nm) to keep QA consistent across floors.
Technical specifications and standards that matter
Ingress: IEC 60529 (IP20 default; IP44/IP65 with kits). Fire: glow-wire 650–850 °C (IEC 60695-2-11). Materials: LSZH options to IEC 60754/61034 for escape routes. Electrical: 230 V AC mains; SELV 12/24 V for controls; keep 1–10 V/DALI cores color-distinct. Wiring windows 0.5…2.5 mm²; strip 8–10 mm. Geometry: 55–71 mm device grid for plate adapters; mounting parts sized to common Vimar boxes and channels.
Applications and compatibility
• Hotels/offices: keyed plugs for modular ceilings, gasketed trims in wet areas, low-profile bases in shallow voids.
• Education/healthcare: LSZH plastics, tamper-resistant holders, clear labels for audit trails.
• Logistics/plant: ceramic caps near hot canopies, IP65 sealed connectors on dusty lines, anti-vibration clips on high bays.
All assemblies align with Vimar conduits, installation channels, and Eikon/Arké/Plana plates, so trims sit flush and ratings survive maintenance.
Selection criteria for B2B buyers
- Fix environment and optic: IP/temperature target, focal height, and beam control.
- Choose holder/base type (E27/E14, GU10/GU5.3/G9, G13/G5, GX53/GX10, R7s) and material (ceramic vs high-temp polymer).
- Define wiring: conductor size, loop-through need, and dimming pairs; lock jacket Ø and gland thread.
- Publish torque/strip rules and SELV barriers in the method statement; add seal kits where IP must be retained.
- Bundle room kits by luminaire family—mounting, connectors, seals, labels—so night-shift swaps don’t alter photometry.
Advantages of working with Bankoflamps
We build the spare-parts map with you first, then ship against it. Each room or zone gets a single EAN pack—holder/base, gasket set, connector, strain relief, and labels—so maintenance doesn’t hunt for missing pieces. Quotes land fast by EAN/MPN; the portal shows EU stock in real time, with lead-time forecasts and downloadable price files you can plug into your programme. For trusted accounts we support up to 30 days post-payment. Deliveries arrive kitted by floor or riser, and our team pre-checks focal heights, IP kits, gland threads, torque notes, and SELV segregation against your drawings—keeping handovers clean across France, the Baltics, Germany, Spain, Italy, Belgium, and the Netherlands.