Vimar Motor Controls and Drives

vimar control gear ranges and series

For mixed residential–commercial projects, vimar control gear spans DIN relays and dimmers, contactors up to 63 A AC-3, impulse/latching units, time and stairway timers, step relays, motor starters, PSUs, and interface modules. Series align with Eikon/Arké/Plana wall devices, keeping room controls and panels inside one part-number map.

vimar contactors and relays coils poles and auxiliaries

To drive fans, pumps, and heaters, vimar contactors and relays offer 2–4-pole frames (AC-1/AC-3 ratings), common coils 24 V AC/DC and 230 V AC, clip-on auxiliary blocks (OF/SD), RC snubbers, and mechanical interlocks for reversers. Screw cages accept 0.5…4 mm² Cu with clear strip lengths printed on the front.

vimar control panels DIN layouts and room bundles

Panel builders assemble AHU and riser boards with DIN enclosures, busbars, and labeling kits; vimar control panels ship as empty chassis or pre-drilled with gland plates and neutral/earth bars, so MCB/RCBO rows, contactors, and I/O sit on predictable pitches.

vimar automation components I O and field buses

Where rooms need scenes and plant needs feedback, vimar automation components include KNX actuators (4/8/12-ch), 0–10 V/1–10 V and DALI broadcast modules, binary/analog inputs, blind controllers, and IP/Modbus gateways. One supervisor can expose alarms, counters, and energy to BMS.

vimar industrial control gear environments and EMC

For plant rooms and workshops, vimar industrial control gear is paired with IP44/IP65 field boxes, surge paths, and 360° braid clamps at gland plates. Route VFD outputs away from analog I/O; use shielded pairs for 0–10 V and bond single-end where the method statement calls for it.

vimar power distribution control feeders and auxiliaries

Floor DBs land feeders on MCCB/MCB rows while status contacts feed supervisors; vimar power distribution control adds shunt/undervoltage releases, phase links, and door-mounted indicators so E-stop and fire links are cleanly wired.

vimar electrical control equipment selection and procurement

Schedules group vimar electrical control equipment by function: motor circuits (contactors, overloads), lighting channels (relays/dimmers), safety interlocks (gate/door), and interfaces (KNX/DALI/Modbus). That keeps spares and drawings synchronized from tender to handover.

Assortment and series map for buyers

• Switching: DIN relays, impulse/latching, time/stairway timers with adjustable delay and manual override.
• Motor circuits: contactors 9–63 A AC-3, thermal overloads, mechanical interlocks for FWD/REV, door interlocks.
• Interfaces: KNX actuators, binary/analog input modules, DALI broadcast controllers, 0–10 V cards for EC fans.
• Power and signaling: 24 V DC PSUs, stack lights, buzzers, selector/key switches, hour-run counters.
• Enclosures: surface/flush boards, steel cabinets, neutral/earth bars, through-door handles, gland plates.
• Accessories: auxiliary contacts, shunt/UV releases, RC snubbers, comb busbars, end-stops, marker strips.

Technical specifications and standards that matter

Supply 230/400 V AC, 50/60 Hz; coils 24 V AC/DC and 230 V AC common. Contact ratings to IEC 60947 with AC-1/AC-3 data on labels. Dimmers/speed modules per IEC 60669-2-1. Control wiring to IEC 60204-1; EMC to EN 61000 family; immunity/ESD declared in datasheets. Terminals 0.5…4 mm² Cu; strip 8–12 mm; torque 0.6–1.2 Nm (DIN gear) and 1.2–2.5 Nm (feeders, per device label). Clearances: 7.5–10 mm breathing between heat sources in warm risers.

Applications and compatibility

• AHUs and fans: contactor start/stop, 0–10 V to EC/VFD, frost/DP alarms on binary inputs.
• Pumps and boosters: duty/assist alternation with time relays, dry-run lockout, hour-run counters.
• Gates and shutters: interlocked UP/DOWN, monitored edges/photocells via safety relays, beacon outputs.
• Rooms and corridors: scene relays, stairway timers, blind actuators with interlocks.
All parts share one rail geometry and labeling, so room plates and panel gear align in the O&M set.

Integration with other Vimar products

Distribution (breakers, SPDs) lands in the same boards; frames from Eikon/Arké/Plana front the room devices. KNX joins BACnet/Modbus through couplers; DALI broadcast lives beside motor logic. Status contacts from breakers feed the same supervisors that trend temperature, pressure, or cycles.

Selection criteria for B2B buyers

1. Fix motor kW and duty cycle, then choose DOL/soft-start/VFD and contactor size (AC-3).
2. Define I/O: 0–10 V/4–20 mA, binary counts, and required gateways; reserve DIN space for auxiliaries.
3. Lock enclosure IP/IK, surge category, and EMC plan (shield clamps, segregation, earth points).
4. Publish torque/strip rules and marker scheme so every floor terminates the same.
5. Pre-bundle room and riser kits: enclosures, contactors/relays, PSUs, I/O cards, labels, and busbars.

Advantages of working with Bankoflamps

Your commissioning windows set the rhythm. We issue job-specific pricing, near-hour quotes by EAN/MPN, and show live EU stock before panels are built. The portal tracks lead times, shipments, and gives downloadable price lists with validity windows you can plan around. Trusted buyers can use post-payment up to 30 days. We consolidate partials so enclosures, contactors, relays, PSUs, I/O, auxiliaries, busbars, and labels arrive rail-bundled by riser. Your account manager cross-checks coil voltages, AC-3 sizes, EMC notes, enclosure IP, and accessory maps against your drawings—keeping deliveries site-ready across France, the Baltics, Germany, Spain, Italy, Belgium, and the Netherlands.