VF600-G3-865-05

VF600-G3-865-05 is a light ribbon component. Used in modular systems for strip lighting applications, provides bright white illumination suitable for various setups demanding linear luminance distribution. Operates on standard DC power input. Rated voltage 24V. Total length approximately 5 meters, flexible but requires structural support during extended installation periods—pay attention to mounting angles and heat dissipation zones. Power consumption around ~19W/m, check total circuit load when scaling system size. Strip width feels tight at ~10mm. LED spacing consistent along the length (gap ≈ 18mm). Emits cool white (~6500K). Luminous flux density about 2000 lm/m—performance varies slightly with temperature fluctuation; think range between -20°C and +45°C operationally safe here but avoid thermal hotspots near connectors or edges; they degrade output stability over time. Product uses adhesive backing, doesn't hold super strong under high humidity or rough surfaces, so better reinforce if long-term application planned outdoors. Soldering pads exposed every cut point; potential cuts every ~100mm subject to markings visible from front side—not always symmetrical though due to manufacturing variance. Technical notes: Voltage supply – nominal = DC24V. Rated IP level unspecified in brief file info—likely not waterproof (test before completion). Color spec cited = Cool White / daylight spectrum (6500 Kelvin metrics). Strip durability = unknown since test batches differ based on adhesives applied regionally bottling inconsistencies noted elsewhere "not unique here." Total load approx max current draw/system rating close estimate across full rolls use specified coil details.