Technical Information
| Item condition |
New |
| Manufacture name |
Universal automatic switch 2,20 m A3281-1SW |
| Brand |
Jung
|
| Categories |
Bus System Devices (KNX/Modbus)
|
| Country of origin* |
DE |
|
* The actual country of origin may differ depending on the delivery batch.
To confirm the specific country of origin, please contact your account manager.
|
| Harmonized System Code |
9031 8080 00
|
| Model |
Movement sensor |
| Bus system KNX |
Yes |
| Bus system radio frequent |
No |
| Bus system Powernet |
No |
| With bus connection |
No |
| Bus system LON |
No |
| Bus system KNX radio |
No |
Packing details
| Packing level 1 |
4011377156043 |
| Packing level 2 |
4011377156043 |
Other Technical data
| Mounting method |
Flush mounted (plaster) |
| Colour |
Black |
| Surface protection |
Other |
| Creep-under protection |
Yes |
| Number of channels |
1 |
| Staircase monitoring |
Yes |
| Material quality |
Thermoplastic |
| Switching power |
0 W |
| Max. transmission range frontally |
8 m |
| Max. transmission range sideways |
6 m |
| Material |
Plastic |
| Diameter detection range on floor |
12 m |
| Substation input |
Yes |
| RAL-number (similar) |
9005 |
| Teach-function for response value luminosity |
Yes |
| Operation mode switch |
Yes |
| Transparent |
No |
| Animal zone |
No |
| Surface finishing |
Glossy |
| Detection angle vertical |
0-80 ° |
| Detection angle horizontal |
0-180 ° |
| Min. switch-on time |
10 s |
| Max. duty cycle |
0 min |
| Response value luminosity adjustable |
Yes |
| Switch-off delay self-learning |
Yes |
| Optimum mounting height |
1.1 m |
| Min. depth of built-in installation box |
0 mm |
Description
This Universal automatic switch integrates into KNX bus systems for automated motion detection and lighting control in power setups.Employs staircase monitoring combined with creep-under protection to enhance coverage and security functionality. Flush mounted (plaster).Colour:Black, RAL 9005.Material:Plastic, thermoplastic quality.Surface protection defined as Other;glossy surface finish applied.Operates optimally at mounting height 1.1m with horizontal detection angles spanned between 0° and 180°, vertical between 0° and 80°.Front transmission range set to max of 8m, sideways up to max of 6m;ground-level floor detection diameter reaches maximum of12 m.Delivers single-channel operation with direct KNX compatibility.Response luminosity adjustability enabled;supported Teach-function for setup optimization under variable light conditions. Trigger parameters include minimum switch-on time:10 s, automatic duty cycle not exceeding marked limits.Max duty cycles limited outright(N/A/Short-Time /Current Loop).Supports Self-learning switch-off delay mechanism ,with manual triggers both programmable & direct-mode operation switches pre-aligned supervisory tangents.;