Technical Information
| Item condition |
New |
| Manufacture name |
ULT.SENSOR UNIV. M30 SN=8M U ANA |
| Brand |
Telemecanique
|
| Categories |
Proximity Sensors
|
| Country of origin* |
US |
|
* The actual country of origin may differ depending on the delivery batch.
To confirm the specific country of origin, please contact your account manager.
|
| Harmonized System Code |
8536 5080 00
|
| Voltage type |
DC |
| Housing material |
Plastic |
| Type of analogy output |
0 V ... 10 V |
| Type of electric connection |
Connector M12 |
| Setting procedure |
Teach-In |
| Construction type housing |
Cylinder, screw-thread |
| Supply voltage |
15-24 V |
| Adjustable distance |
300-8000 mm |
| Measuring range length |
300-8000 mm |
Packing details
| Packing level 1 |
3389110704143 |
Other Technical data
| Max. output current |
0 mA |
| Ambient temperature |
-20-60 °C |
| Switching frequency |
0 Hz |
| Type of switching output |
Other |
| Type of switch function |
Other |
| Blind zone |
300 mm |
| Explosion safety category for gas |
None |
| Explosion safety category for dust |
None |
| Standard for interfaces |
Other |
| No-load current |
60 mA |
| Relative linearity deflection |
0 % |
| Relative repeat accuracy |
2.54 % |
| Synchronization possible |
No |
| Material active area of sensor |
Plastic |
| Material of cable sheath |
Other |
| AWG-number |
0 |
| Width sensor |
44 mm |
| Diameter sensor |
30 mm |
| Height of sensor |
44 mm |
| Length of sensor |
118 mm |
Description
This cylindrical ultrasonic sensor has a ULTEM case. It has a supply voltage of 15V to 24V DC and an analog ouput of 0V to 10 V. This cylindrical ultrasonic distance sensor with analogue output, is mountable directly on a surface or bracket, thanks to its cylindrical thread and 2 fixing nuts. ULTEM® high strength case makes it ideal for high temperature environments. Multi-LED display allows to identify status of the sensor, to facilitate setup and troubleshooting. IP67 protection makes this product ready for the harshest environments. It can operate in very cold (-20°C) and hot environments (+60°C). It has a standard M12 connector, compatible with all existing market sensor cabling. It is IEC 60947-5-2 compliant.