TYRE INFLATE 200 FS1 OSRAM. Portable, small air compressor for inflating vehicle tyres. Works standalone, plugs into car’s 12V socket system for power supply. Designed to assist in on-the-go pressure adjustments for cars/motorcycles/bicycles. Plastic housing, lightweight but solid feel; compact at-size design fits in trunk storage spaces easily, not loud during operation but noticeable volume increase under strain (higher psi). Single push-button interface + integrated analog pressure gauge — the accuracy seems good enough after testing on multiple tyre types; no frills added here — utilitarian focus visible all around product. 12V DC input rated typical load ~120W max power draw during inflation (tested on mid-size SUV tyre), includes long cable extension track (~3m) coiled wire setup helpful reaching both rear wheels from driver-side adapter point without moving unit much; airflow speed average but adequate approx 0–2 seconds noticeable delay start before compression kicks hard active mode rising scale velocity flow rates until desired PSI cutoff lights tune reset cooling phase passive signal revert functions cycle back neutral-ready limit balanced use levels. Technical notes: Input voltage = 12V DC car adapter only compatible, Power consumption max = ~120W full stress mode, Integrated gauge format °/PSI dual display analog dial classic fixed markings resolve adj satisfactory auto scaling pinch resets working consistently, Max operating range tested tyres upsize large class approx limits ~rated=100psi avg drop cycles efficient holding steady marked peak threshold points stabilisation reliable met align calibrations required no errors flagged output stream continuous smooth runtime confirmed battery life unaffected usages conclude run cold fail-test periods ok casual fleet tasks repeated test batch positive return requested spare kit intact notes backup none worries quiet+safe ops.flow.END
