FLT-SEC-T1+T2-3S-350/25-FM - Type 1+2 special combined lightning current and surge arrester

Name: FLT-SEC-T1+T2-3S-350/25-FM - Type 1+2 special combined lightning current and surge arrester
Brand: Phoenix Contact
Price: 377.350 EUR
Availability: InStock

In stock: Yes Vendor stock: No Minimal order quantity: 1

Price (excl. VAT):

377,35 € per pcs

This price is valid until 24.12.25 or while stock lasts

EAN: 4046356950664

MPN: 2905470

Box: 1

Estimate delivery time at our warehouse (approx.): 4-6 weeks

Technical Information

Item condition	New
Manufacture name	FLT-SEC-T1+T2-3S-350/25-FM - Type 1+2 special combined lightning current and surge arrester
Brand	Phoenix Contact
Categories	Surge Protection Devices (SPD)
Country of origin	DE
Harmonized System Code	8536 3030 00
Lightning impulse current (10/350 µs)	100 kA
Voltage protection level	1.5 kV
Max. continuous voltage AC	350 V
Nominal voltage AC	240 V
Nominal voltage DC	0 V
Test class	Type 1 + 2
Voltage protection level L-N	1.5 kV
Max. continuous voltage DC	0 V
Max. PV-voltage	0 V
Voltage protection level N-PE	0 kV
Voltage protection level L-PE	0 kV

Packing details

Packing level 1

4046356950664, 4046356950664

Other Technical data

Number of poles	4
Construction size	Other
Remote signalling	Yes
Follow current extinguishing capability	25 kA
Signalling at the device	Optic
Max. conductor cross section solid (solid, stranded)	35 mm²
Max. conductor cross section flexible (fine-strand)	0 mm²
Voltage protection level (DC+ - DC-)	0 kV
Voltage protection level (DC+/DC- - PE)	0 kV
Specific energy (W/R)	0 kJ/Ohm
Max. overcurrent protection device, parallel connection (fuse)	0 A
Max. overcurrent protection device, series connection (fuse)	0 A

Description

This component serves as a compact power supply unit for converting AC input to DC output in electrical equipment. It ensures stable voltage regulation for downstream devices, critical in systems where precise power delivery is required. ### Electrical Specifications Input range: Designed to handle a wide AC input spectrum (likely 100–240V). Output: Delivers regulated DC voltage suitable for low-power electronic components. Efficiency levels meet typical industrial standards. Circuitry provides basic protection features such as overload and short circuit safeguards. ### Mechanical Design and Integration Built within an enclosed casing for safe handling. Mounting slots or brackets likely available, depending on the specific application environment (DIN rail/mount/surface screw points). Compact footprint aids fitting into constrained enclosures while maintaining accessibility during assembly or troubleshooting phases. - Rated operating temperature must be observed; over-range could lead to derating or failure. - Factory-sealed unit — tampering voids warranty and alters safety compliance ratings. - Check datasheet explicitly before incorporating into high-sensitivity instrumentation setups; ripple noise may vary by batch/model revisions.