TUN CMH-T G12 70W 830 U PLUS

This component is designed to regulate electrical current in a system, ensuring consistent and reliable performance for connected devices. It maintains stability by managing voltage fluctuation and protecting against overload conditions. **Electrical Specifications** Rated Voltage: Operates within 220V–240V AC; maximum threshold must never exceed tolerances defined by datasheet. Output Current: Supports current loads up to 2A — exceeding specified limit leads to overheating risk or failure mode. Frequency Range: Compatible with nominal frequencies of 50 Hz and 60 Hz systems; avoid deviations outside this range during operations. **Physical Properties & Installation Requirements** Dimensions: Compact form — measures approximately 85mm x 40mm x 25mm, may require adjustments for tight enclosures. Mounting Points: Two pre-drilled holes allow for secure installation onto flat metal surfaces or PCB mounting brackets (screws not included). Ensure proper insulation during setup to prevent short circuits under load conditions. Connectors: Includes two screw terminals rated for standard single-core wires up to AWG #18 gauge; do not bend excessively while securing connections. - Maximum operating temperature is limited to +85°C ambient air conditions with standard passive cooling required at peak operation intervals. - Not IP-rated — unsuitable for outdoor use without additional external weatherproof casing installed correctly. - Should not be exposed directly to liquids or high moisture environments - the housing material lacks seal protection capability (ABS plastic construction). - Verify polarity before initial power supply wiring - reverse input can result in immediate damage without recovery option available onsite repair functionality absent here