Trio LED lamps and tubes

trio led lamps for hospitality and office fit-outs

TRIO Leuchten’s lamp range covers everyday E27/E14 and project staples like GU10 and G9 with stable colour points and predictable dimming on quality phase-cut gear. For schemes that need quick energy wins without rewiring, these lamps drop straight into existing holders at 220–240 V AC. Expect 2700 K, 3000 K, and 4000 K options, CRI 80 as baseline with CRI 90 on selected SKUs for retail and reception areas. Typical outputs span 250–1,500 lm with efficacies around 90–120 lm/W, power factor ≥0.5 for compact types and up to 0.90 on higher-watt models. Installers usually tag open-plan and corridor packages under trio led lamps in schedules so ordering and on-site labelling stay aligned.

trio led bulbs sockets optics and output

E27/E14 A-classics, candles, and globes handle general illumination; GU10 reflectors with 24°, 36°, and 60° beams solve track and downlight retrofits; compact G9 capsules cover decorative heads. MacAdam ≤3 SDCM keeps batch consistency; flicker is kept low with modern drivers for screen comfort in offices. GU10 thermal behaviour matters: allow clearance in enclosed cans and prefer aluminium-core versions for 4000 K in continuous-run retail. Where glass looks are specified, filament styles deliver 2700 K ambience at low load. RFQs often list trio led bulbs alongside base type and CCT to pin down substitutions.

trio energy saving lights electrical and optical data

Self-ballasted lamps follow IEC 62560; EMC is per EN 55015 with immunity to EN 61547. Declared lifetimes land at L70 15,000–25,000 h, switching tolerance ≥30,000 cycles, and ambient rating typically −20…+40 °C depending on cap type. Colour rendering sits at Ra 80 or 90; R9 values are published on pro models for better skin tones. Dimming: leading/trailing edge with recommended dimmer lists; note minimum load thresholds to avoid shimmer on long circuits. Maintenance teams mark stock as trio energy saving lights when grouping by watt class for hotels and student housing.

trio decorative led lighting applications and ambience control

Front-of-house needs warm tone, quiet optics, and repeatable scenes. 2700 K with CRI 90 reads best on timber and textiles; in lounges, choose low-glare globes or opal candles to soften shadows. For accent, 24° GU10 lifts feature walls while 60° fills walk-throughs. Wireless nodes or phase-cut dimming work under existing wiring; where a BMS sits upstream, use room-level wall dimmers with scene memory. Submittals for cafés and boutique lobbies often call the package trio decorative led lighting to separate it from back-office stock.

trio indoor led lamps system integration with TRIO luminaires

TRIO wall, pendant, and floor families share the same CCT/CRI bins, so mixing lamps and luminaires keeps colour uniformity across floors. Emergency lighting stays central-battery or maintained-module in dedicated fittings; retrofit lamps remain non-emergency unless specifically rated. For acoustic ceilings, pick lower-output lamps with higher density to reduce glare and reflections. In handover docs, project engineers reference trio indoor led lamps with photometric targets and beam angles so facility teams can maintain like-for-like.

trio dimmable led bulbs selection notes for specifiers

Start with the control method on site. For phase-cut, confirm trailing-edge compatibility and dimmer minimum load; avoid over-cabling long runs with mixed loads. Specify beam angle and CCT by zone—36°/4000 K for task aisles, 24°/3000 K for accents, opal globes for general ambient. Check thermal limits in enclosed fixtures; some GU10 and G9 SKUs require partial ventilation to hold lifetime claims. Where colour fidelity matters, request CRI 90 with published R9. For tender clarity, list trio dimmable led bulbs alongside dimmer model and circuit length.

trio retrofit led lights procurement with Bankoflamps

Bankoflamps supports programme-driven deliveries: project-specific pricing, near-hour quote turnaround by EAN/MPN, and live EU stock before crews are committed. The portal exposes lead times, shipment tracking, and downloadable price lists with validity windows so you can lock budgets. Trusted accounts can use post-payment up to 30 days. We consolidate partials so lamps, holders, dimmers, and accessories arrive room-bundled; your account manager cross-checks base types, lumen packages, beam angles, and CCT against drawings for sites across France, the Baltics, Germany, Spain, Italy, Belgium, and the Netherlands. For fast receiving and replenishment, buyers label cartons as trio retrofit led lights with cap type and colour code.