TRILUX Accessories for track lights

trilux accessories scope and use cases

Large estates run smoother when footprints, connectors, and label schemes repeat across floors. With trilux accessories, installers keep thread sizes (M20/M25), SELV/mains segregation, and 360° braid clamps consistent from ceiling voids to IP54 field boxes. Expect 220–240 V AC environments, −20…+45 °C typical in voids, glow-wire 650/850 °C plastics where required, and IK07–10 hardware for busy back-of-house zones.

trilux lighting accessories product range

The family of trilux lighting accessories spans gear-tray brackets, optics and louvers, blind plugs, strain-relief grommets, emergency test/indicator sets, and trunking joiners. UGR tuning and beam changes are possible without re-coding the base luminaire, so photometry holds from mock-up to handover. IP20 is standard; IP40–65 ancillaries serve damp or dusty spaces.

trilux installation components technical details

Panels and field boxes accept trilux installation components with terminals for 0.5…2.5 mm² Cu, strip 8–12 mm, torque 0.6–1.2 Nm. Relay interfaces are AC-15 rated 5–10 A for contactor coils; SELV control runs carry DALI-2/DT8 or 1–10 V. Compliance anchors: EN 60598-1/-2-xx (luminaire safety), IEC/EN 61347 & IEC 62384 (control gear), EN 60529 (IP), EN 60695-2-11 (glow-wire), EN 55015/61547/61000-3-2/-3-3 (EMC/power quality).

trilux mounting kits mechanical guidance

Ceiling substrates vary—concrete, grid, purlin—so trilux mounting kits arrive with span/load tables and corrosion classes. Use rigid bars where alignment matters, twin-wire suspension over congested services, and anti-vibration bushings near machinery bays. Typical fastener torque is 2.0–3.0 Nm; allow expansion gaps on long aluminum runs to avoid diffuser ripple and preserve IK claims.

trilux connectors and fittings interfaces and EMC

Push-in or screw blocks under trilux connectors and fittings keep polarity and PE continuity reliable. Keyed SELV plugs segregate control from mains; DALI-2 harnesses share pinouts with emergency indicators for quick swaps. Maintain 360° shield termination at gland plates, keep LED lead lengths inside the driver’s published limits, and route sensor cables away from VFD trays to contain emissions. Dielectric and creepage/clearance targets follow EN 60598-1.

trilux electrical accessories applications and compatibility

Office, retail, healthcare, and logistics areas lean on trilux electrical accessories to standardise loop-through, gland selection, and inspection windows. IP20 parts suit clean voids; IP54 gaskets and stainless fixings handle wash-down and coastal interiors. Keep one label font and marker size across floors, document circuit limits at 230 V with PF/THD considered, and publish fallback states for DALI-controlled zones.

trilux spare parts for lights procurement with Bankoflamps

Refits stay on schedule when optics, diffusers, seals, and gear trays drop in without re-drilling. With trilux spare parts for lights, we align sourcing to commissioning windows: project-specific pricing, quote responses in roughly an hour by EAN/MPN, and live EU stock before lifts or night shifts are booked. The portal shows lead times, shipment tracking, and downloadable price lists with validity windows you can plan against. Trusted clients can use post-payment up to 30 days. We consolidate room-bundled consignments so brackets, glands, harnesses, indicators, and trays arrive together, and your account manager cross-checks optics, output classes, IP/IK, inrush/MCB data, and wiring notes against drawings—keeping deliveries site-ready across France, the Baltics, Germany, Spain, Italy, Belgium, and the Netherlands.

Selection notes for B2B teams

Fix mount type first (recessed, surface, trunking, catenary). Define IP/IK and ambient, then connector family and strip lengths. Record torque windows on drawings, show maximum fittings per MCB with inrush (A²s), and keep SELV/mains segregation and shield strategy identical on every riser. Cross-reference to Trilux luminaires, LED drivers, and emergency units so one connector map and test routine covers the estate.