Register to unlock your exclusive B2B prices and start shopping. Sign up now!
Staircase time switch, 1 NO contact 16A
In stock: No
Vendor stock: No
Minimal order quantity: 1
Price (excl. VAT):
39,87 €
EAN: 4010312401620
MPN: 23100836
Package: 1
Estimate delivery time at our warehouse (approx.):
2-4 weeks
Technical Information
| Item condition | New |
| Manufacture name | Staircase time switch, 1 NO contact 16A |
| Brand | ELTAKO |
| Categories |
Push Buttons and Control
|
| Country of origin | CN |
| Harmonized System Code | 8536 5080 00 |
| Mounting method | Flush mounted (plaster) |
| Function | Electronic with switching-off pre-warning |
| Release-delay | 1-12 min |
| Control voltage 1 | 230 V |
| Type of control voltage 1 | AC |
| Frequency control voltage 1 | 50 Hz |
| Wiring system | 3 wire configuration |
| Pre-warning of switching-off | Flickering |
| Repetitive | Repetitive + continuous light + time extension |
| Voltage type of supply voltage | AC |
| Supply voltage | 250 V |
| Max. incandescent lamp load | 2000 W |
| Max. load fluorescent lamp | 1000 VA |
| Rated switch current | 10 A |
| Current surge function selectable | No |
| Max. switching power LED | 100 W |
Packing details
| Packing level 1 | 4010312401620, 4010312401620 |
| Packing level 2 | 4010312401620 |
| Packing level 3 | 4010312401620 |
Other Technical data
| Built-in depth | 18 mm |
| Width in number of modular spacings | 0 |
| Max. load fluorescent lamp (Duo circuit) | 1000 VA |
| Max. load fluorescent lamp (parallel compensated) | 500 VA |
| Push button glow-lamp current | 50 mA |
| Number of contacts as normally closed contact | 0 |
| Number of contacts as normally open contact | 1 |
| Number of contacts as change-over contact | 0 |
Downloads
Description
1 NO contact not potential free 16A/250V AC. 230V LED lamps up to 600W, energy saving lamps ESL up to 200W, incandescent lamps up to 2300W. Switch-off early warning switchable. Standby loss 0.7 watt only. Modular device for DIN EN 50022 rail mounting. 1 module = 18mm wide, 58mm deep. Zero passage switching to protect contacts and lamps. The noiseless electronics do not even bother the sensitive ear - unlike many synchronous motors with mechanical gears. By using a bistable relay coil power loss and heating is avoided even in the onmode. The switched consumer may not be connected to the mains before the short automatic synchronisation after installation has terminated. 230V control voltage, supply voltage and switching voltage. Glow lamp current up to 50mA, dependent on the ignition voltage of the glow lamps. Precise variable time range from 1 to 12 minutes, settable by minute scale. Own permanent light switch with the big rotary switch. 3-wire circuit with attic lighting, not resettable. Only for retrofitting of existing systems. After a power failure the lighting is switched on again in case the set time has not elapsed yet. If switch-off early warning function is switched onthe light starts flickering approx. 30 seconds before time-out and is repeated three times at decreasing time intervals.