Staircase time switch, 1 NO contact 16A
In stock: No
Vendor stock: No
Minimal order quantity: 1
Price (excl. VAT):
29,07 €
This price is valid until 24.12.25
Estimate delivery time at our warehouse (approx.):
4-6 weeks
Technical Information
Item condition |
New |
Manufacture name |
Staircase time switch, 1 NO contact 16A |
Brand |
ELTAKO
|
Categories |
Push Buttons and Control
|
Country of origin |
CN |
Harmonized System Code |
8536 5080 00
|
Mounting method |
Flush mounted (plaster) |
Function |
Electronic |
Release-delay |
1-12 min |
Control voltage 1 |
230 V |
Type of control voltage 1 |
AC |
Frequency control voltage 1 |
50 Hz |
Wiring system |
3 and 4 wire configuration |
Pre-warning of switching-off |
None |
Repetitive |
Repetitive + continuous light + time extension |
Voltage type of supply voltage |
AC |
Supply voltage |
250 V |
Max. incandescent lamp load |
2000 W |
Max. load fluorescent lamp |
1000 VA |
Rated switch current |
10 A |
Current surge function selectable |
No |
Max. switching power LED |
100 W |
Packing details
Packing level 1 |
4010312401637, 4010312401637 |
Packing level 2 |
4010312401637 |
Packing level 3 |
4010312401637 |
Other Technical data
Built-in depth |
18 mm |
Width in number of modular spacings |
0 |
Max. load fluorescent lamp (Duo circuit) |
1000 VA |
Max. load fluorescent lamp (parallel compensated) |
500 VA |
Push button glow-lamp current |
50 mA |
Number of contacts as normally closed contact |
0 |
Number of contacts as normally open contact |
1 |
Number of contacts as change-over contact |
0 |
Downloads
Description
1 NO contact not potential free 16A/250V AC. 230V LED lamps and energy saving lamps ESL up to 100W, incandescent lamps up to 2000W. Without switch-off early warning. Standby loss 0.7 watt only. Modular device for DIN EN 60715 TH35 rail mounting. 1 module = 18mm wide, 58mm deep. The noiseless electronics do not even bother the sensitive ear – unlike many synchronous motors with mechanical gears. 230V control voltage, supply voltage and switching voltage. Variable time range from approx. 0.2 to 12 minutes. Glow lamp current up to 50mA, dependent on the ignition voltage of the glow lamps. Own permanent light switch with the big rotary switch. 3-wire and 4-wire circuits, resettable, with attic lighting if 4-wire circuit. Automatic detection of the method of connection. Without switch-off early warning function and without zero passage switching. With double connections for pushbutton and lamp in order to connect either above or below or only below.