THORGEON PAR LED spots

thorgeon par led spots performance and beam control

Accent plans live on candela, not just lumens. Typical packages for thorgeon par led spots deliver 900–2 500 lm at 10–28 W with 10° 15° 25° 36° 60° beams, CRI 90 options for retail, and CCT 2700/3000/3500/4000 K held within SDCM ≤3. Power factor ≥0.95 and THD <10 % keep boards clean; surge immunity 2–4 kV protects drivers in mixed panels. Thermal paths sized to Tc keep L80 50–60k h from LM-80/TM-21 families when fittings run −20…+40 °C, so thorgeon par led spots maintain punch over time.

thorgeon par30 led bulbs fitment and optical choices

PAR30 bodies (≈95 mm Ø, ~100–110 mm length) in E27 threads drop into most legacy cans and track heads without bezel changes. Opal fronts reduce high-angle luminance in low ceilings; clear TIR lenses maximise centre-beam candela. For aisle or wall-wash, 25–36° balances spill and reach; jewellery and logo walls often need 10–15°. Installers specify thorgeon par30 led bulbs by lumen bin and beam so identical rooms commission with one aiming chart built around those thorgeon par30 led bulbs.

thorgeon par38 led lamps output for higher mounts

At ~120 mm Ø, thorgeon par38 led lamps cover 1 800–3 500 lm at 18–32 W for 4–8 m heights, keeping 3:1–5:1 accent ratios on verticals. Glass-filled housings and aluminium cores manage case temperature in enclosed trims; enclosed-rated versions are available where cups are sealed. For façades and canopies, IP65 heads with front glass resist washdown. Facilities stock thorgeon par38 led lamps by CCT and beam so night swaps don’t disturb uniformity.

thorgeon directional par spotlights control, dimming, and glare

Phase-cut trailing edge yields quiet, smooth 5–10 % low-end; DALI/0–10 V variants synchronise scenes across bays and maintain start levels. Flicker metrics meet PstLM/SVM guidance on tested controls. Baffles and micro-prisms keep luminance <1 500 cd/m² at 65° to respect office glare targets. Designers deploy thorgeon directional par spotlights where the same footprint must deliver punchy accents and soft-edge fills; operations repeat those thorgeon directional par spotlights SKUs per floor to stabilise service.

thorgeon high output par lighting thermal discipline and wiring detail

Document Tc and verify after 60 min at worst-case ambient; maintain 100–150 mm clearance above heads and avoid insulation contact unless rated. Terminals accept 0.75…2.5 mm², strip 8–10 mm; glands M16/M20 with matched ferrules preserve IP when fixtures are sealed. Low-inrush driver options keep relay banks stable on large circuits. With thorgeon high output par lighting, crews lock torque windows and ferrule sizes in the drawing set, so repeats of thorgeon high output par lighting pass goods-in checks quickly.

thorgeon commercial led spot lamps applications and layouts

Retail perimeters, reception backdrops, galleries, and food courts need consistent geometry: track adapters, collar depth, and trim overlap remain identical room-to-room. Use 24–36° at 3 m for general accent; 10–15° for jewellery and brand marks; 60° for soft tables. Emergency maintained versions declare 120–500 lm in emergency mode. Specifiers choose thorgeon commercial led spot lamps to keep optics, drivers, and finishes consistent across estates; maintenance bins thorgeon commercial led spot lamps by beam and CCT to prevent mixed appearance.

thorgeon energy efficient par lights efficacy and lifecycle planning

Expect 105–135 lm/W depending on beam and CCT, with start <0.5 s and no warm-up. PF ≥0.95 limits reactive penalties on sub-metered boards. Publish spacing, candela targets, and dim curves in the method statement; pilot one bay to confirm UGR and colour on the chosen palette. Estates favour thorgeon energy efficient par lights because identical bins stabilise energy baselines; planned relamps of thorgeon energy efficient par lights by zone avoid drift from mixed batches.

Technical specifications for engineers

• Optical: 10°/15°/25°/36°/60° beams, CRI 80/90, CCT 2700–4000 K, SDCM ≤3; centre-beam candela tables supplied per lumen bin.
• Electrical: 220–240 V E27, optional 12 V GU5.3 on selected models; PF ≥0.95; surge 2–4 kV L-L; inrush data provided for relay sizing.
• Thermal and environment: −20…+40 °C typical; enclosed-rated SKUs available; Tc points marked on the cap ring.
• Compliance: caps per IEC 60061; LED modules EN 62031; safety/performance EN 62560/EN 60598; EMC EN 55015 with immunity EN 61547.
• Mechanics: PAR30 ≈95 mm Ø, PAR38 ≈120 mm Ø; mass within lampholder limits; front-glass options for open luminaires

Selection checklist for B2B buyers

1. Fix mounting height and accent ratio, then select beam by substrate.
2. Lock CCT/CRI by space type and publish scene targets.
3. Choose control topology and list approved dimmers or DALI drivers with minimum level.
4. Confirm envelope against trims and “enclosed-rated” requirement; verify Tc and clearance.
5. Record ferrule size, strip window, torque, gland thread, and surge class in the worksheet.
6. Room-bundle by lumen bin and beam; keep one SKU per zone to stabilise aiming and photometry.

Advantages of working with Bankoflamps

We schedule deliveries the way crews focus and aim—by room bundle, not catalogue page. Quotes with EAN/MPN land in about an hour, and live EU stock is shown before teams are booked. Your portal lists lead times, shipment tracking, and downloadable price files with validity windows you can plan around. Trusted accounts can use post-payment up to 30 days. We consolidate per zone so lamps, trims, collars, glands, and control gear arrive together, and your account manager cross-checks beam sets, lumen bins, control method, Tc limits, ferrule sizes, and torque notes against your drawings—keeping PAR packages site-ready across France, the Baltics, Germany, Spain, Italy, Belgium, and the Netherlands.