TF600S-G1-927-05

Used as high-efficiency light component in integrated LED systems, TF600S-G1-927-05 acts as a compact ribbon-style emitter for versatile illumination setups. Works in both low-profile accent applications and standard strip configurations. Essential for tight installs where space-critical solutions matter. Length approx. 5m, flexible base material—easy bending without compromising conductors or lumens. Connects to common +24V DC drives, compatible with modular installations—you gotta double-check polarity at terminations before power-up though; uneven voltage drop across longer runs noticeable without proper driver-sizing. Light quality: 2700K warm white & CRI above 90—decent color rendering but not the best out there if daylight accuracy needed (commercial grade fine). Uniform lumen output per meter specs decent (~600 lm/m) but avoid over-loading segments past recommended operating current; efficiency drops fast when cooling isn't sorted properly. Power draw ~14.4W/m nominal under stable conditions flat-load on steady driver voltage (total ~72W max per roll). Connection terminals already prepped one side, opposite end user-cuttable/adaptable — can solder if you’re patient w/ angles/slits along copper pads after insulation cutout. Technical notes: 5-meter length flexible format, Operating Voltage +24VDC nominal, Luminous flux ~600lm/m, CCT 2700K soft white spectrum, CRI >90 rated, Dimensions (Ribbon width): Approx 10mm x height negligible (<3mm), Full roll consumption max ~72W load drawn @ nominal rating, Cuttable sections spaced every 50mm approx trims easily possible troubleshooting wiring faults replace segment by splice method