| Item condition | New |
| Manufacture name | Switch disconnector 3P 100A |
| Brand | EATON |
| Categories |
Switch Disconnectors
|
| Country of origin | RO |
| Harmonized System Code | 8536 2090 00 |
| Rated permanent current Iu | 100 A |
| Number of poles | 3 |
| Rated operating voltage | 690 V |
| Degree of protection (IP), front side | IP20 |
| Version as main switch | Yes |
| Version as safety switch | No |
| Version as maintenance-/service switch | Yes |
| Rated short-time withstand current lcw | 2 kA |
| Packing level 1 | 4015082591410 |
| Width | 90 |
| Height | 145 |
| Depth | 88 |
| Rated operation power at AC-3, 400 V | 0 kW |
| Number of auxiliary contacts as normally open contact | 0 |
| Number of auxiliary contacts as normally closed contact | 0 |
| Conditioned rated short-circuit current Iq | 0 kA |
| Number of auxiliary contacts as change-over contact | 0 |
| Number of switches | 1 |
| Interlockable | Yes |
| Motor drive integrated | No |
| Type of electrical connection of main circuit | Frame clamp |
| Version as emergency stop installation | Yes |
| Type of control element | Rocker lever |
| Rated operation power at AC-23, 400 V | 55 kW |
| Colour control element | Black |
| Suitable for floor mounting | Yes |
| Suitable for front mounting 4-hole | No |
| Suitable for front mounting centre | No |
| Suitable for distribution board installation | Yes |
| Suitable for intermediate mounting | Yes |
| Max. rated operation voltage Ue AC | 690 V |
| Motor drive optional | No |
| Voltage release optional | No |
| Device construction | Built-in device fixed built-in technique |
| Rated permanent current at AC-21, 400 V | 0 A |
| Switching power at 400 V | 0 kW |
| Version as reversing switch | No |
| Rated permanent current at AC-23, 400 V | 0 A |
| Degree of protection (NEMA) | Other |
| With pre-assembled cabling | No |
Switch-disconnector PN..-.. comply with the isolation properties even for earthed IT networks. Accessories, such as bridge kits, connection terminals and door coupling rotary handles enable individual installation in the most varied of distribution systems. PN part no. are not suitable for remote functions. Notes: main switch characteristics including positive drive according to IEC/EN 60204 und VDE 0113. Isolating characteristics according to IEC/EN 60947-3 and VDE 0660. busbar tag shroud according to VDE 0160 Part 100.