Register to unlock your exclusive B2B prices and start shopping. Sign up now!
Surge arrester terminal block 2-pole DEHNconnect SD2
Order only
Not Available
Estimate delivery time to our warehouse: By request
Technical Information
| Item condition | New |
| Manufacture name | Surge arrester terminal block 2-pole DEHNconnect SD2 |
| Brand | Dehn |
| Country of origin* | DE |
| * The actual country of origin may differ depending on the delivery batch. To confirm the specific country of origin, please contact your account manager. | |
| Harmonized System Code | 8536 3010 00 |
| ETIM | EC000943 |
| Max. continuous voltage AC | 6 V |
| Nominal discharge surge current (8/20) | 10 kA |
| Nominal load current | 0.5 A |
| Voltage protection level core/core | 14 V |
| Max. continuous voltage DC | 8.5 V |
| Degree of protection (IP) | Other |
| Nominal voltage DC | 5 V |
Packing details
| Packing level 1 | 4013364150621, 4013364150621 |
Other Technical data
| Mounting method | DIN rail (top hat rail) 35 mm |
| Connection 1 | Push-in terminal |
| Number of conductors (without earthing) | 2 |
| Limiting frequency | 100 MHz |
| Explosion-tested version | Yes |
| Voltage protection level core/earth | 650 V |
| Signalling at the device | None |
| Assembly width | 6 mm |
| Signal disconnection | Yes |
| Earthing via | DIN rail (top hat rail) |
Downloads
Description
DEHNconnect SD2 terminal block with integrated surge protection. Energy-coordinated two stage arrester for protecting balanced and unbalanced interfaces with extra-low voltages. Signal circuits can be disconnected by removing the plug-in part. Also suitable for high transmission rates due to a diode matrix with minimised capacitance. It is advisable to use SAK shield connection systems for shielded bus lines.
Accessories
Order only
Not Available