STAR TRADING Festive lightings

star trading festive lighting overview

Star Trading’s catalogue is built for fast seasonal roll-outs and year-round décor: connectable low-voltage chains for façades, plug-and-play indoor sets for shelves and trees, and pro rubber-cable lines for streetscapes. Runs cover 3–50 m per segment depending on family; systems either run 230 V direct or via 24/31 V SELV drivers with quick-lock connectors. Colour packs: extra-warm 1800–2100 K for amber ambience, classic 2300–2700 K warm white, 3000–4000 K neutral, plus single colours and RGB on selected strings. Typical LEDs are epoxy-filled 3/5 mm or SMD micro-heads with wide diffusion so the line reads continuous rather than “dotty”.

star trading christmas lights families and use-cases

• Tree & room sets (indoor): thin PVC leads, IP20, 100–800 LEDs, constant-on with memory timers for hospitality rooms and reception areas.
• Icicle/curtain/net: vertical drop or grid optics for windows, atria and façades; stocked in 2–6 m widths with link ports at each end.
• Cluster & micro-wire: high LED density on flexible silver/copper wire for shelves, bars, and display props where the cable should disappear.
• E27 festoon: shatterproof globes (Ø45–60 mm), replaceable LED lamps, rubber H05RN-F cable; perfect for courtyards and terraces.
• 31 V connectable: low-voltage backbone for public zones; one PSU feeds multiple linked pieces with a rated max length shown on the tag.

star trading decorative light chains series map

• Connect-Pro (rubber): IP65, black/white cable, mechanical keys prevent reverse mating; single feed up to 100–150 m (model-dependent).
• Home-Connect (SELV): 31 V system with starters, splitters, and extensions; IP44; ideal for hotels that reconfigure scenes.
• Micro-Wire: IP20/44 variants; battery or USB/mains adapters with 6/8-hour timers—good for pop-up merchandising.
• Festoon-E27: 230 V, replaceable lamps, 0.5–1.0 m socket pitch; optional filament-look lamps for period styling.

Electrical and mechanical specifics that matter

Supply options: 220–240 V, 50/60 Hz direct, or SELV 24/31 V via class II drivers. Power per 10 m typically 3–12 W on micro-wire, 6–18 W on standard clusters, and 20–40 W on high-output outdoor lines. Ingress: IP20 (indoor), IP44 (porches/canopies), IP65 (rubber cable, fully weatherproof). Operating window −20…+40 °C; UV-stable blacks/whites on outdoor families. Fixing: molded eyelets and clip points every 0.5–1.0 m; weight and permissible spans are printed on the tag so installers can set catenaries without guesswork. Standards typically referenced: EN/IEC 60598-1 and -2-20 (lighting chains), EN 60529 (IP), EN 55015/EN 61547 (EMC).

Deployment patterns and visual planning

Atria and windows: curtain nets with 10–15 cm drop pitch keep luminance even on camera. Long streets or courtyards: festoon with 0.5–1.0 m socket pitch; mix clear and opal globes to balance sparkle vs glare. Rails, shelves, reception desks: micro-wire at 2100–2300 K to warm timber and brass. For retail windows, blend warm chains on the perimeter with neutral accents on merchandise so skin and fabrics read honestly. Where maintenance access is limited, specify fixed-output drivers and sealed joints; where scenes change, use the 31 V linkable ecosystem with splitters so you can re-route without re-cabling.

star trading outdoor festive lights installation notes

Rubber-cable sets land IP65 with molded joints and strain relief; use stainless clips on coastal façades and leave drip loops under every feed. Keep supply points sheltered; IP ratings assume the connector faces are fully seated. On long façades, feed both ends or every 25–30 m to avoid visible volt-drop dimming. For festoon catenaries, publish span tables—most 2×1.0 mm² rubber lines are comfortable at 10–15 m between anchors with intermediate ties.

Integration with other layers

These chains sit cleanly alongside pendants, profiles, and window luminaires. DALI isn’t typical at lamp level; dim at the feeder using upstream phase-cut for 230 V lines or PWM/voltage trim on SELV drivers (check model notes). For timed shows, place chains on switched circuits with astronomic schedules; hotel rooms prefer battery/USB micro-wire with built-in 6/8-hour timers so housekeeping doesn’t manage switches.

Selection checklist for planners

1. Voltage path: SELV 31 V for public touch zones; 230 V for fixed exterior runs with protected cabling.
2. IP & cable: IP20 PVC for rooms, IP44 for covered canopies, IP65 rubber for full weather.
3. Optic & density: cluster for high luminance, icicle/curtain for surfaces, festoon for architectural lines.
4. Colour policy: 1800–2100 K for ambience, 2300–2700 K classic warm, 3000–4000 K where merchandise colour fidelity matters.
5. Run length: check the printed max-link (m) and total W per feeder; plan mid-feeds on long streets.
6. Fixings: clips/eyelets per metre; confirm substrate and fastener type early.

Procurement lines that avoid re-picks

Specify: family + length + CCT + IP + voltage/PSU + connector system + max-link rating + accessory set (splitters, extensions, clips). Example: “Connect-Pro Curtain 6 m, 2300 K, IP65, 230 V, link 100 m max, 10× façade clips, 1× mid-feed kit.” This format lets warehouse teams kit cartons without back-and-forth.

Compact B2B logistics (Bankoflamps)

You get a named manager mapping chains, drivers, splitters, and fixings to drawings. Live EU stock by warehouse; quotes in ~1 hour with EAN/MPN, IP, max-link tables, and load notes. Orders by manufacturer code with dated price lists; lead-time tracking and consolidated shipments by zone to cut site handling. Post-payment up to 30 days for trusted accounts.