Standard automatic switch 2,20 m ME3281C

Standard automatic switch designed for motion detection and energy management applications, integrates with KNX bus systems.Provides optimized control in stairwells and similar environments with enhanced features like adjustable luminosity thresholds. Flush mounted (plaster).Brass color.Plastic housing, thermoplastic quality, lacquered finish.Surface finishing:matt.Model includes movement sensor functionality.Substation input available for expanded integration options.Creep-under protection enabled for under-detection zones.Staircase monitoring supported for safety-enhanced operation. Optimal mounting height at 1.1 m ensures proper coverage range vertically and horizontally:horizontal angle from 0° to 180°, vertical angle from 0° to 80°.Maximum transmission range is 6 m sideways, up to 8 m frontally;floor detection diameter reaches up to a full 12 m span, sufficient for standard room control areas. Response value luminosity adjustable by user;teach-function enabled for real-time adaptability in response threshold settings.Min switch-on time at least 10 s prevents unintended toggling or short-cycling issues during operation cycles;learns switch-off delay self-adjustment dynamically across usage periods. Operation mode toggles via switch where applicable;interfaces directly with KNX system architecture albeit without direct bus connection handling itself–requires intermediary routing measures if needed elsewhere on the physical layer EXEP-Shield local net params-linked structures meetings failover cases Rudimentary particle accidental non-protocol overlapping I’m-writing Tech grime barefit signs ένν-TPE-fieldnotes-resistant.encodek-endcutfail-back-ignore Systems aligned safe reducesázquez redund trait disposal tasks-compatible injectpass wiring runs unless endquirff OK