SLV E27 LED Lamps

slv e27 led bulbs range and context

E27 retrofits from SLV are the straight swap for general rooms, corridors, and decorative fixtures where stable color, solid efficacy, and predictable dimming matter. Nominal input is 220–240 V, 50/60 Hz with integrated drivers; outputs span ~470–1 520 lm across A60/A67 globes, candles, and compact minis. Color options cover 2700/3000/3500/4000/6500 K with CRI 80 for back-of-house and CRI 90/95 where rendering drives brand experience. Tight binning (≤3 SDCM in pro lines) keeps long ceiling grids uniform.

slv e27 standard base lamps product families and outputs

Families include omni bulbs for diffuse room fill, filament styles for visible pendants, and coated globes for low-glare shades. Short-neck formats solve shallow canopies; high-output nodes replace legacy 60/75/100 W tungsten while holding socket and envelope sizes. Beam is nominally 270–320° on omni types; coated optics tame brightness in shallow shades without starving vertical illuminance. Typical efficacies land ~95–120 lm/W depending on CCT and envelope.

Technical specifications and standards

Power factor is generally ≥0.90 at rated load with THD in the 10–15 % band. Lifetime L70/L80 sits around 15–35k h on decorative filaments and 25–50k h on pro omni capsules at Ta 25 °C; operating window usually −20…+40 °C. Flicker performance can meet office targets where specified (PstLM ≤1.0, SVM ≤0.4). Photometry is available in IES/LDT per CCT and lumen node. Conformity aligns with IEC/EN 62560 for self-ballasted lamps plus EN 55015/EN 61547 for EMC and EN 61000-3-2/-3-3 for mains quality. Use aluminum or thermally conductive PC heat-spreaders in enclosed luminaires; keep insulation clear of the lamp’s Tc area.

slv dimmable e27 lamps control behavior

Most dimmable SKUs target trailing-edge (RC) devices for quieter acoustics and better low-level stability; selected part numbers also qualify on leading-edge (RL). Expect 5–10 % minimum stable level on decorative filaments and 1–5 % on pro capsules, dimmer-dependent. For grouped control and scenes, move upstream to DALI-2 via luminaire drivers rather than mixing many phase-cut channels.

Applications and compatibility

Hospitality: 2700–3000 K, CRI 90, coated or opal globes to avoid filament sparkle at seated eye level. Retail: 3000–3500 K with higher lumen nodes in high-bay pendants; maintain verticals for color fidelity. Offices and schools: 4000 K with wide omni distribution; use glare-aware shades. Heritage fixtures benefit from filament styles where the lamp is visible. Where schedules mention slv screw base led bulbs, confirm envelope (A60/A67/G95), lumen class, and dimmer family before locking substitutions.

slv e27 led lighting solutions integration with SLV systems

Lamps drop into SLV pendants, decorative shades, and enclosed ceiling cups; combine with SLV frames where cut-outs need regularizing around retrofit housings. In mixed rooms, balance omni sources with linear accents from SLV ribbon systems on the same control narrative. For emergency strategies, pair luminaires that keep a baseline lux independent of the E27 channels.

Selection criteria for B2B clients

Start with target lux and room geometry, then choose lumen node and CCT/CRI. Validate thermal space in enclosed shades; if Tc margin is tight, step down wattage or open the canopy. Keep circuits homogeneous in lamp type to stabilize dimming. Publish inrush/channel counts even for integrated lamps so MCBs and panel schedules stay predictable. For rapid roll-outs, standardize two lumen nodes per floor to hold illuminance across varying ceiling heights; specify slv retrofit led lighting e27 where no rewiring is permitted, and reserve filament styles for visible fixtures labeled as slv household led bulbs in tenant manuals.

Advantages of working with Bankoflamps

You receive individual B2B pricing and a dedicated account manager who maps socket type, envelope, lumen nodes, and dimming method to your room data sheets and reflected ceiling plans. Our portal shows live EU stock by warehouse; quotes typically return in about an hour with EAN/MPN, lumen and photometry files, PF/THD, inrush, Tc limits, and envelope codes so choices don’t drift during coordination. Orders are placed by manufacturer code with downloadable, always up-to-date price lists and validity windows. We provide lead-time tracking, order status, and purchase-history analytics; trusted clients can use post-payment up to 30 days. Consolidated shipments by line and zone reduce freight and on-site sorting, and we actively support projects in France, the Baltics, Germany, Spain, Italy, Belgium, and the Netherlands.