Technical Information
| Item condition |
New |
| Manufacture name |
SIPLUS S7-1500 F-DI 16x24VDC -30 ... +60 °C with conformal coating |
| Brand |
Siemens
|
| Categories |
PLC Units & I/O Modules
|
| Country of origin |
DE |
| Harmonized System Code |
8538 9091 00
|
| Number of digital inputs |
16 |
| Number of digital outputs |
0 |
| Voltage type of supply voltage |
DC |
| Output current |
0 A |
| Type of digital output |
None |
| Supply voltage DC |
19.2-28.8 V |
| Digital inputs configurable |
Yes |
| Digital outputs configurable |
No |
Packing details
| Packing level 1 |
4047618072018 |
Other Technical data
| Width |
35 mm |
| Height |
147 mm |
| Depth |
129 mm |
| Input current at signal 1 |
3.7 mA |
| Suitable for safety functions |
Yes |
| Time delay at signal exchange |
0.4-20 ms |
| Type of voltage (input voltage) |
DC |
| Redundancy |
No |
| Short-circuit protection, outputs available |
No |
| Explosion safety category for gas |
ATEX gas-ex-protection, Cat. 3G |
| Explosion safety category for dust |
None |
| Appendant operation agent (Ex ia) |
No |
| Appendant operation agent (Ex ib) |
No |
| Performance level according to EN ISO 13849-1 |
Level e |
| Permitted voltage at input |
-30-30 V |
| SIL according to IEC 61508 |
3 |
Description
SIPLUS S7-1500 F-DI 16x24 V DC based on 6ES7526-1BH00-0AB0 with conformal coating, -30…+60 °C, F digital input module, 35 mm overall width; up to PL E (ISO13849-1)/ SIL 3 (IEC 61508) SIMATIC ET 200MP is a modular and scalable I/O system with IP20 for universal use, and offers the same system advantages as the S7-1500. It permits the shortest bus cycle times and fastest response times, even with large volumes of data. The distributed I/O system is particularly easy to install, wire, and commission. Thanks to its scalable design, you can gear the IO station exactly to the on-site requirements. Just like the CPU, the digital input modules are also protected against extreme ambient conditions. Due to the 100% conformal coating they can withstand biologically, chemically and physically active substances, condensation, frost, and corrosive gases. Regardless of the conditions, your digital signals are reliably recorded.