Shada Switches and sockets

shada switches and sockets for commercial interiors

Teams pick this portfolio to keep one visual language across offices, hotels, classrooms, and retail while hitting install-time targets. Mechanisms snap into single- to five-gang frames; finishes run white, graphite, metallic, antibac, and stainless accents. Typical ratings: switches 16 AX/250 V AC, sockets 16 A/250 V AC; IP20 standard with IP44 kits (gasketed carriers) for splash zones. Materials pass glow-wire tests; front faces take everyday abrasion without whitening.

Product range and frame systems

One grid across sizes keeps reveals aligned whether you stack two or five gangs. Modules include 1-pole/2-way/intermediate, bell-push, blinds, presence/key modules, dimmers (leading/trailing edge), USB-A/C chargers, and data/AV plates. Faceplate geometry stays consistent, so refreshes don’t force new back boxes.

Technical specifications and standards for Shada devices

Switch mechanisms: EN 60669-1/-2-1; socket-outlets: EN 60884-1; USB power units: EN 62368-1. Terminals accept 1.5–2.5 mm² (fine-strand with ferrules). Contact sets on 16 AX rockers handle LED inrush typical of modern luminaires. Optional shutters and child-proof inserts suit public or education spaces.

shada electrical switches duty and dimming

Rocker mechanics are specified for 40–80 k cycles; dimmers publish minimum load and low-level curve. Use trailing-edge on driver-based luminaires to keep flicker down; confirm warm-up behavior on high PF LED lamps before sign-off.

shada wall sockets and charging options

Schuko (Type F) and French (Type E) variants are available with screw or claw fixings, plus orientation inserts where furniture demands rotated earthing. USB-A/C plates (up to 30 W PD, model-dependent) reduce wall warts; hotel editions bundle night-light and label tiles. IP44 kits add seals and matched bezels for wash-adjacent counters.

shada plug sockets variants

Tamper-resistant shutters for public spaces, keyed service outlets for housekeeping, and coloured/engraved hospital circuits for critical rails. Contact tubes are nickel-plated for wear; terminals are torque-marked to keep maintenance consistent across floors.

Wiring and mounting practice with shada installation accessories

Back-box depths: 40 mm for rockers, ≥50 mm for dimmers/USB. Use divider inserts when mixing mains and SELV in one frame; keep data on shielded keystones with 360° bonding where specified. Multi-gang runs maintain creepage distances; spacer shims correct uneven plaster so bezels sit flat.

Applications and compatibility

Offices: two-way at entries, intermediate on long corridors, dual frames for power+data at desk height. Hotels: master card holder at door, bedside 2-gang with USB-C. Healthcare/education: antibacterial fronts, IP44 in wet areas, engraved legends for facilities. All modules land cleanly on the same grid, so spares and training stay simple.

Integration and grid coordination

Faceplates align visually with rack face hardware in meeting rooms; dimmers pair with building lighting drivers and contactor packs. Where emergency circuits exist, red fronts and engraved tiles prevent confusion. Multi-room templates keep the same module order left-to-right so maintenance doesn’t relearn per floor.

Selection criteria for B2B engineers

• Load and duty: 16 AX for LED circuits; check dimmer curve vs driver type.
  
   
• Ingress and materials: IP44 for splash zones; antibac where policy demands; stainless in lobbies.
  
   
• Charging and data: USB-C PD where permitted; separate SELV with dividers; keystone plates for structured cabling.
  
   
• Service model: one grid family site-wide; torque values on every terminal; stock spare fronts and rockers.
  Where hard isolation is needed on tooling benches, specify labeled shada power switches upstream of the socket group to match the site’s LOTO rules.
  
   

Procurement and kitting for rollouts

Build per-room kits: mechanisms, carriers, frames, fronts, dividers, screws, and labels—bagged by room tag. Add a service pack per 20 rooms (spare bezels, rockers, USB modules). Lock finish codes early; colour drift between lots is what occupants notice first.

Advantages of working with Bankoflamps

We align pricing with your room schedules and show live EU stock before crews are booked. Quotes typically land in about an hour. Ordering by EAN/MPN prevents variant drift; your portal displays lead times, shipment status, and downloadable price lists. Trusted clients can use post-payment up to 30 days. We consolidate partials to cut freight and keep price-validity windows stable for phased fit-outs. Your account manager cross-checks grid family, finish, IP options, dimmer/load compatibility, keystone inserts, and labeling—so cartons arrive site-ready.