Technical Information
| Item condition |
New |
| Manufacture name |
Socket. LS990 lg protection contact & supply safety |
| Brand |
Jung
|
| Categories |
Sockets
|
| Country of origin* |
DE |
|
* The actual country of origin may differ depending on the delivery batch.
To confirm the specific country of origin, please contact your account manager.
|
| Harmonized System Code |
8536 6990 00
|
| ETIM |
EC000125
|
| Nominal current |
16 A |
| Nominal voltage |
250 V |
| Mounting method |
Flush mounted (plaster) |
| Model |
Protective contact (type F) |
| Connection type |
Push-in clamp |
| Suitable for degree of protection (IP) |
IP20 |
Packing details
| Packing level 1 |
4011377063280, 4011377063280 |
| Packing level 2 |
4011377063280 |
Other Technical data
| Colour |
Grey |
| Halogen free |
Yes |
| Number of units |
1 |
| Lockable |
No |
| With hinged lid |
No |
| Surface protection |
Other |
| With signal lamp |
No |
| Number of phases |
1 |
| With enhanced contact protection |
Yes |
| With on/off switch |
No |
| Protective contact |
Yes |
| Label space/information surface |
No |
| Eject-mechanism |
No |
| Material quality |
Duroplast |
| Rotated central insert |
No |
| Over voltage protection |
No |
| Fault current protection |
No |
| Special power supply |
No special power supply |
| Insulated mounting |
No |
| Material |
Plastic |
| Rated fault current |
0 mA |
| Type of fastening |
Mounting with screw |
| RAL-number (similar) |
7035 |
| Transparent |
No |
| Surface finishing |
Glossy |
| With miniature fuse |
No |
| With loop through function |
No |
| Device width |
70 mm |
| Device height |
70 mm |
| Device depth |
0 mm |
| Number of socket outlets switchable |
0 |
| With function lighting |
No |
| With orientation lighting |
No |
| With built-in USB power supply |
No |
| Number of modules (module system) |
0 |
| Number of active pins (round) |
2 |
| Number of active pins (flat) |
0 |
| Protective earth pin round |
Yes |
| Min. depth of built-in installation box |
0 mm |
| Anti-bacterial treatment |
No |
Downloads
Description
Socket for standard 16 A, 250 V systems.Designed with protection contact, safety-enhanced for general power distribution setups. Flush-mounted plaster installation.Material:plastic;surface glossy duroplast.Grey color, RAL 7035 close match.Width 70 mm x height 70 mm x depth undefined (0 mm listed).Mounting via screws;push-in clamp connection type.Impact resistance unspecified but enhanced touch protection included (IP20 rated).Nominal voltage at 250 V and current at 16 A–suitable single-phase supply setup without special conditions or features like overvoltage or fault current shielding.Protective earth pin round design confirmed, two active round pins only—type F compliance identified for Schuko standard use cases in lighting grey variant finish under LS series aesthetic trimming line function slots absence mentioned within ergonomic statable blank layout non-aligned config etc