Technical Information
| Item condition |
New |
| Manufacture name |
SCHUKO socket with USB type A A1520-18AMO |
| Brand |
Jung
|
| Categories |
Sockets
|
| Country of origin* |
DE |
|
* The actual country of origin may differ depending on the delivery batch.
To confirm the specific country of origin, please contact your account manager.
|
| Harmonized System Code |
8536 6990 00
|
| ETIM |
EC000125
|
| Nominal current |
16 A |
| Nominal voltage |
250 V |
| Mounting method |
Flush mounted (plaster) |
| Model |
Protective contact (type F) |
| Connection type |
Push-in clamp |
| Suitable for degree of protection (IP) |
IP20 |
Packing details
| Packing level 1 |
4011377184213 |
Other Technical data
| Colour |
Other |
| Halogen free |
Yes |
| Number of units |
1 |
| Lockable |
No |
| With hinged lid |
No |
| Surface protection |
Lacquered |
| With signal lamp |
No |
| Number of phases |
1 |
| With enhanced contact protection |
Yes |
| With on/off switch |
No |
| Protective contact |
Yes |
| Label space/information surface |
No |
| Eject-mechanism |
No |
| Material quality |
Thermoplastic |
| Rotated central insert |
No |
| Over voltage protection |
No |
| Fault current protection |
No |
| Special power supply |
No special power supply |
| Insulated mounting |
No |
| Material |
Plastic |
| Rated fault current |
0 mA |
| Type of fastening |
Mounting with claw and screw |
| RAL-number (similar) |
0 |
| Transparent |
No |
| Surface finishing |
Matt |
| With miniature fuse |
No |
| With loop through function |
No |
| Device width |
55 mm |
| Device height |
55 mm |
| Device depth |
0 mm |
| Number of socket outlets switchable |
0 |
| With function lighting |
No |
| With orientation lighting |
No |
| With built-in USB power supply |
Yes |
| Number of modules (module system) |
0 |
| Number of active pins (round) |
2 |
| Number of active pins (flat) |
0 |
| Protective earth pin round |
Yes |
| Min. depth of built-in installation box |
48 mm |
| Anti-bacterial treatment |
No |
Downloads
Description
SCHUKO socket with integrated USB Type-A.Flush-mounted unit for power distribution and device charging.Designed for modern electrical installations where USB functionality is required alongside standard sockets.Nominal current 16 A, nominal voltage 250 V, one unit configuration.Plastic thermoplastic housing, halogen-free construction.Lacquered matt surface finish, color unspecified but categorized as "Other." Mounting method flush plaster installation with fastening via claw and screw system;minimum depth of built-in box 48 mm required.Dimensions:width 55 mm, height 55 mm, depth unavailable.Impact strength not defined.Includes protective contact (type F model), two active round pins present;central insert not rotated.Enhanced contact protection implemented in design.Not lockable or switchable;no miniature fuse included either.IP20 rated—suitable for indoor use only under non-wet conditions on a single-phase system connection type push-in clamp employed here.Built-in USB power supply feature enabled;associated anti-bacterial treatment absent.No surge or fault-current protection measures incorporated into the design setup parameters suggest intended usage under light-medium operational loads without provisions like signal lamps or eject mechanisms allocated onboard lighting components omitted entirely too