Technical Information
| Item condition |
New |
| Manufacture name |
SCHUKO socket LS1520NWW |
| Brand |
Jung
|
| Categories |
Sockets
|
| Country of origin |
DE |
| Harmonized System Code |
8536 6990 00
|
| Nominal current |
16 A |
| Nominal voltage |
250 V |
| Mounting method |
Flush mounted (plaster) |
| Colour |
White |
| Model |
Protective contact (type F) |
| Halogen free |
Yes |
| Number of units |
1 |
| Lockable |
No |
| With hinged lid |
No |
| Connection type |
Push-in clamp |
| Surface protection |
Other |
| With signal lamp |
No |
| Number of phases |
1 |
| With enhanced contact protection |
No |
| With on/off switch |
No |
| Protective contact |
Yes |
| Label space/information surface |
No |
| Eject-mechanism |
No |
| Material quality |
Duroplast |
| Rotated central insert |
No |
| Over voltage protection |
No |
| Fault current protection |
No |
| Special power supply |
No special power supply |
| Insulated mounting |
No |
| Material |
Plastic |
| Rated fault current |
0 mA |
| Type of fastening |
Mounting with screw |
| RAL-number (similar) |
9016 |
| Transparent |
No |
| Surface finishing |
Glossy |
| With miniature fuse |
No |
| With loop through function |
Yes |
| Suitable for degree of protection (IP) |
IP20 |
| Device width |
70 mm |
| Device height |
70 mm |
| Device depth |
0 mm |
| Number of socket outlets switchable |
0 |
| With function lighting |
No |
| With orientation lighting |
No |
| With built-in USB power supply |
No |
| Number of modules (module system) |
0 |
| Number of active pins (round) |
2 |
| Number of active pins (flat) |
0 |
| Protective earth pin round |
Yes |
| Min. depth of built-in installation box |
0 mm |
| Anti-bacterial treatment |
No |
Packing details
| Packing level 1 |
4011377063143 |
| Packing level 2 |
4011377063143 |
| Packing level 3 |
4011377063143 |
| Packing level 4 |
4011377063143 |
Downloads
Description
SCHUKO socket LS1520NWW provides reliable protective contact (type F) interfaces for 230V systems, used extensively in flush-mounted power distribution setups.Designed for general-purpose wiring within modern plaster installations. nominal current 16 A.nominal voltage 250 V.housing material plastic (duroplast).halogen-free construction ensures reduced fire risk.glossy white finish (RAL 9016).device dimensions:width 70 mm, height 70 mm, depth unspecified – flush mounting design.IP20 rated, suitable for dry indoor environments only.surface protection marked as "other".push-in clamp connection type simplifies wiring steps and ensures secure contacts.one unit included per item—single-phase operation only with round protective earth pin active at all times.mounted using screws – no hinged lid or additional locking mechanisms available. passive build;no USB charging support, overvoltage safeguards, miniature fusing options, signal lighting features like orientation LEDs absent here too—optimized simplicity intended strictly for standard use-case scenarios within normalized limits and controlled conditions targeting routine domestic/commercial grid settings lacking heavy-duty demands!