SCHUKO® socket A1520NBFWWM

SCHUKO® socket A1520NBFWWM.Standard component for power systems, typically serves as a protective contact outlet (type F) in flush-mounted installations.Designed to distribute nominal current and voltage safely in residential or commercial environments. White thermoplastic material with lacquered surface protection.Matt finish.Rated fault current 0 mA.Nominal current 16 A at nominal voltage 250 V, single-phase operation.Device dimensions:width 55 mm, height 55 mm, depth of built-in installation box—minimum required depth is listed as 0 mm;device depth itself is also indicated as 0 mm but this may refer to visible extension beyond flush mount level.Push-in clamp connection type used for wiring interface ensures secure fitting during installation process. IP20-rated protection providing limited ingress defense against solid objects >12mm diameter but no water resistance;not suitable for heavy-duty or exposed applications without further sealing measures or environmental protections in place.Protective contact integrated into the design with two active round pins per standard configuration and mandatory grounding pin present centrally below socket outlets. No halogen content within composition meeting higher flame-resistance standards under safety codes governing instances of high thermal-flammables exposure yet anti-bacterial treatment absent limiting germicidal implications—standard-fit allergenic properties acceptable where adequate HVAC airflow exchange maintained overhead appliances airspaces regulated normal spread tolerances typical switchgear ratings expected anywhere installed sockets-contact connectivity楼