Scame Wall and ceiling luminaires

scame wall and ceiling luminaires project context

Specifiers use this family where fittings must survive daily cleaning, deliver uniform light, and keep second-fix simple. Outputs span ~800–6,000 lm with neutral or cool CCT at 3,000–4,000–5,700 K; CRI 80 is standard with ≥90 options for colour-critical zones. Housings are PC or die-cast aluminium, trims resist yellowing, and gear trays unclip for service without disturbing the base. Protection classes run IP40–IP44 for corridors and reception, up to IP54–IP65 for wash areas; impact ratings reach IK08–IK10 for schools and transport hubs. Drivers hold PF ≥0.90, THD <15–20% on mains variants, with surge protection modules 2–4 kV where the site needs extra headroom.

scame surface mounted luminaires range overview

Three practical groups cover most schedules.
Compact round and square bulkheads in 250–330 mm sizes handle stair cores and small rooms, with opal or micro-prismatic optics to control glare near walls. Linear bodies at 600–1,500 mm serve corridors and teaching spaces with end-to-end through-wiring for quick daisy-chain. Architectural wall and ceiling forms offer slimmer bezels and accessory rings for front-of-house areas. Emergency versions integrate maintained or non-maintained packs; sensor options include microwave presence with daylight hold-off for low-traffic zones. L70 lifetimes target 50,000–70,000 h at Ta 25–35 °C, with LM-80 qualified LEDs and TM-21 projections available in the submittal set.

scame indoor wall lights optics and control

Optics are chosen by distance to task and glare limits. Opal diffusers give soft ambient layers in lobbies; micro-prismatic faces reduce high-angle luminance in narrow corridors; asymmetric wall-wash trims push light down without bright spots. Many crews favour 4,000 K for wayfinding and 3,000 K for hospitality. DALI-2 and switch-dim gear is common; corridor function reduces output to a hold level when no movement is detected, then ramps smoothly to full. Where acoustic panels line the walls, indirect versions keep luminance off the eye line while meeting average lux.

scame ceiling light fixtures installation and wiring

Bases accept 2.5 mm² loop-through with clear terminal marking and retained screws; push-in cages are available for quick second-fix. Backplates pick up 60 mm fixing centres and offer rear or side entries sized M16–M20 for glands. Shallow bodies sit under 80–95 mm total projection for tight stairwells. For plaster and tile, leveling slots allow fine correction so rows look straight even on uneven substrates. Operating temperature typically −20…+40 °C; specify high-Ta drivers if the ceiling void runs warm. Where site EMC is demanding, choose metal-base versions and bond earth points as indicated.

Technical specifications and standards

Electrical and optical Efficacy typically 100–130 lm/W depending on CCT and diffuser type; ripple managed for PstLM and SVM within good-practice thresholds around rotating plant. Colour tolerance ≤3 SDCM for consistent appearance across batches. Driver lifetime ≥50,000 h at Tc limits, inrush documented for breaker selection.
Ingress and impact IP40–IP65 depending on trim and gasket; impact IK08–IK10 per EN 62262 for public circulation and sports-adjacent areas.
Safety and compliance Luminaires to IEC/EN 60598-1 and relevant -2 parts, photobiological safety per EN 62471 (RG0/RG1 typical), EMC per EN 55015 and EN 61547. Materials include halogen-free diffusers for low-smoke projects.
Mounting accessories Anti-tamper screws, through-wiring kits, spacer rings for surface conduit, and decorative bezels to align public-side looks with back-of-house bodies.

Applications and compatibility

Corridors, lift lobbies, plant access routes, classrooms, and wash-adjacent zones benefit from stable, low-glare light and quick maintenance. Hotels mix soft fronts with robust service-area fittings using one fixing geometry, so spares stay lean. Retail back-rooms value IP54 trims and sensor logic to cut idle burn. When a brief calls for feature pieces, schedule scame decorative wall / ceiling lighting alongside functional units to keep the visual language consistent. For open offices, planners specify a base layer of scame ambient luminaires and add task lighting at benches to meet UGR and uniformity targets.

Integration with other brand products

Mechanical details line up with Scame installation boxes and wiring devices, so frames and glands match without adapters. For outdoor approaches and loading bays, use Scame plugs and distributors to power temporary heads during night works while the permanent fittings are mounted. Distribution boards host DALI PSUs, emergency test relays, and SPDs on the same rail pitch used elsewhere, keeping maintenance simple. Where BMS points are required, choose DALI-2 or potential-free contact interfaces and label to the site standard.

Selection criteria for B2B clients

Photometry and glare Set target lux, uniformity, and UGR by space type; pick opal for soft ambience, micro-prism for corridors, asymmetric for wayfinding.
Colour and CRI Use 4,000 K CRI 80 for general areas; specify ≥90 CRI where colour checks or signage matching matters. Keep one CCT per floor to avoid patchwork.
Ingress and impact Choose IP44–IP65 with IK08+ for wash-adjacent or abuse-prone spaces; IP40 suffices for offices.
Controls Decide on DALI-2 or sensor-integrated bodies; include corridor function where occupancy is intermittent.
Electrical detail Confirm inrush against breaker curves; check loop-through capacity and gland range for the actual cable OD.
Logistics Standardise two body sizes and one bezel colour across each zone; pre-kit spacers and anti-tamper screws for security floors.

Advantages of working with Bankoflamps

Expect project-specific pricing tied to your room and circuit schedule, a named account manager, and live EU stock visibility before you commit. Quotes return quickly so weekend works and night shifts stay on track. Orders by EAN or MPN drop cleanly into your ERP; downloadable price lists remain current through revisions. Your portal shows lead times and order status, plus purchase-history analytics to standardise body sizes, CCTs, and control types across sites. Trusted clients can use post-payment terms up to 30 days. We coordinate consolidated shipments for multi-location drops and set price-validity windows so phased installs remain predictable.