Scame Installation pipes

Scame’s installation catalogue is built for real jobs: predictable bend behaviour, consistent thread and entry geometry, and accessories that finish a run without on-site improvisation. Specifiers can standardize from apartments to logistics halls while keeping fire, impact, and ingress targets under control.

scame installation pipes range and materials

The portfolio covers rigid and pliable options in the common trade diameters Ø16, 20, 25, 32, 40, 50, 63 mm. Rigid PVC-U serves dry interiors and technical voids; LSZH halogen-free blends limit smoke and acidity for schools, healthcare, and mass-transit shells; corrugated PP or HDPE solves offsets and vibration. Surface colours match application logic—light grey for general interiors, black for exterior or UV-exposed runs, and orange where identification matters.

scame conduit systems product families

Think in three families that simplify bills of materials:

• Rigid straight runs for risers and corridor spines where straightness and clamp spacing drive speed.
• Corrugated pliable sections to bridge services and land in shallow backboxes without heat bending.
• Pre-wired assemblies on request for repetitive rooms, cutting pull times and snag risk.

scame junction conduits sizes and entry options

Boxes and tees mirror conduit diameters with metric knockouts and threaded entries M16–M40. Deep lids accept device couplers; shallow lids keep profiles tight behind fixtures. Glands use the same thread language as locknuts, so installers mix plain, grommeted, or IP-rated entries without adapters. Clear internal volumes preserve bend radius for ≥6×D guidance when multiple conductors share the path.

Scame technical specifications and standards

• Mechanical: compression classes sized for common routing (typ. ≥750 N for heavy duty), impact IK07–IK09 depending on wall thickness.
• Ingress: assemblies from IP40 indoors to IP54–IP65 with matched glands and lids; gasket kits keep ratings after maintenance.
• Thermal: routing window −25…+90 °C by material; UV-stabilized options for façade and canopy lines.
• Fire and smoke: LSZH blends limit smoke density and acidity for occupied interiors.
• Compliance: designed within EN 61386 conduit system framework; metric threads and clamp spacing guidance printed on bags to prevent over-tightening.

Scame applications and compatibility

Risers and corridors run rigid pipe for straight pulls; plant rooms use corrugated links to absorb vibration at fans and pumps; parking decks pair UV-stable conduits with gasketed boxes; food retail and schools favour LSZH in occupied zones. For lighting and controls, pre-wired pulls reduce ceiling time; for EV bays and yard gates, large-bore routes carry power plus control without exceeding fill ratios. On drawings, the umbrella phrase scame protective installation piping is often used to group these routes under one package.

Scame integration with other brand products

Conduits, boxes, glands, and couplers align with the same entry geometry used on Scame sockets, isolators, and distribution boards, so riser terminations stay consistent. Where mixed vendors appear, metric threads, locknuts, and reducer bushings keep transitions clean. This also streamlines installs around luminaires, sensors, and actuators that expect scame wiring conduits with predictable OD and wall thickness.

Scame selection criteria for B2B clients

1. Route and environment
   Rigid PVC-U for dry interiors; LSZH halogen-free for occupied spaces; UV-stabilized or black HDPE outdoors; gasketed boxes near washdown or dust.
2. Diameter and fill
   Hold conductor fill to conservative ratios; step from Ø20 to Ø25 mm once multi-core or parallel runs exceed comfortable pull tension.
3. Bend strategy
   Heat-formed bends on rigid pipe in visible areas; corrugated links behind devices; keep ≥6×D radius where cable specs demand
4. Ingress and impact
   Match IP and IK to the zone; add strain relief at vibrating equipment.
5. Program logic
   Repeat two or three diameters across floors and one box depth per zone; stock one colour per environment to simplify spares.

Advantages of working with Bankoflamps

You receive project-specific B2B pricing aligned to your conduit schedule, a named account manager, and live EU stock before commitment. Quotes typically return in about an hour. Ordering by EAN/MPN keeps ERP data clean; downloadable price lists stay current for tenders. Your portal shows lead times and order status, plus purchase-history analytics to consolidate SKUs. For trusted clients we support post-payment up to 30 days and plan consolidated shipments with clear price-validity windows across phases.