Scame Fixings

scame fixings project context

Installers spec this range when brackets must hold their line, anchors bite first time, and labeling survives maintenance. The portfolio covers light interior runs through plant areas: carbon steel with sendzimir or hot-dip galvanizing, plus A2/A4 stainless for wash-down and coastal sites. Typical working loads run from 0.5–3.0 kN per point for wall/ceiling supports depending on span and substrate. Hole patterns and thread sizes are consistent across families, so a single tool kit and gauge set serves the whole floor.

Scame product range and series overview

Cantilever arms, trapezes, and 41×41 strut frames carry trays, pipes, and enclosure rows with predictable deflection. Perforated angles handle small devices and signage. Concrete, masonry, and composite substrates are covered with matched anchors, screws, and chemical systems; each family lists embedment depth, edge distance, and spacing tables. Cable retainers and cleats keep bundles compliant in ceiling voids and risers without nicking sheaths. For panel work, washers, spacers, and isolation pads remove galvanic risks between dissimilar metals.

scame mounting brackets formats and loads

Lengths from 150–600 mm with 2.0–2.5 mm wall thicknesses cover most cantilever duties. Slotted faces accept M6/M8/M10 hardware; load classes are tabulated by arm length and wall type with L/200 deflection guidance. Corrosion protection options include Z275 pre-galv, HDG after fabrication for cut-edge integrity, and A2/A4 where chemicals or salt are present. End caps and bracing kits improve stiffness on long runs and reduce vibration near fans.

scame clips and fasteners for cable and conduit

Metal saddles, spring clips, and polymer clamps handle Ø10–63 mm. Quick-fit designs speed night shifts; lined variants protect LSZH jackets. Where fire integrity is required in escape routes, specify all-metal retainers so supports remain in place under heat. For three-phase power, trefoil cleats are available with stainless straps and insulating liners to control electromechanical forces during faults.

scame installation hardware sizes and geometry

Strut profiles, joining plates, and T-bolts follow a common geometry, so trays, luminaires, small cabinets, and pipe shoes sit on one backbone. Pre-punched holes align at 50 mm pitch; angle brackets provide 90°, 45°, and adjustable joints. Levelling slots in base plates help true long rows on imperfect substrates.

scame anchors and screws substrate solutions

Torque-controlled expansion anchors cover cracked and non-cracked concrete; concrete screws offer rapid install and immediate loading; bonded studs with styrene-free resin address edge distances and overhead work. Typical embedments: 50–80 mm for M8/M10 screws, 70–110 mm for M10/M12 expansion types. Zinc-flaked heads improve salt-spray life on exposed steel.

Technical specifications and standards

Materials and finishes Carbon steel Z275 or HDG ≥45–70 μm; stainless A2 (304) and A4 (316) for aggressive zones; isolation pads recommended for dissimilar joints.
Loads and deflection UDL tables published per bracket/span; design to EN 1993 methods with L/200 deflection or project-specific.
Anchoring design Concrete to EN 1992-4; ETA-assessed options available for expansion, screw, and bonded anchors. Spacing, edge distance, and group effects documented; seismic C1/C2 variants offered where required.
Fire behaviour All-metal fixings maintain support under elevated temperatures in protected routes; select collars and saddles compatible with the building’s fire strategy.
Corrosion categories Select finish to site class (C1–C5). HDG after fabrication for cut-edge protection; A4 in saline or chemical spray.
Dimensions and threads M6/M8/M10/M12 across families; torque windows printed on data cards. Washers and spring plates keep clamp forces stable over time.
Compatibility Cable cleats aligned with EN 61914 practices; tray/ladder hole maps match Scame routes for fast pick-and-place.

Applications and compatibility

Office and education Use strut trapezes for perforated trays and mesh baskets above ceilings; light cantilevers for small enclosures and luminaires.
Retail and hospitality Install stainless hardware near kitchens and wash-down zones; polymer-lined clips on LSZH control bundles.
Industrial support areas Mount ladder routes, pipe shoes, and interlocked sockets on the same rail height for clean sightlines.
The same geometry fits Scame trays, boards, enclosures, and wiring devices, so scame fixing components travel between front- and back-of-house without adapters.

Integration with other brand products

Hole patterns and rail sizes match Scame cable bearing systems, distribution boards, and installation boxes. Gland plates and cabinet bases share thread sizes, so anchors and bolts repeat across rooms. For temporary power, brackets carry Scame plugs and distributors alongside trays; identical labels and earth lugs keep audits simple.

Selection criteria for B2B clients

Substrate Confirm concrete class or masonry type; choose expansion, screw, or chemical anchors accordingly and check edge distances.
Load path Map tray width, device mass, and span; pick bracket class with 20–30% headroom and verify deflection.
Environment Choose finish by corrosion class; move to A4 near pools, food prep, or coast.
Fire and safety Use all-metal retainers in escape routes; keep supports continuous around dampers and penetrations.
Geometry Keep one rail depth and bolt family per floor; use levelling slots to maintain straight sightlines along corridors.
Logistics Pre-kit brackets, bolts, washers, and anchors by zone; stock spare end caps and isolators to speed change orders.

Advantages of working with Bankoflamps

You get Individual B2B Prices tailored to your take-off, plus a Personal Account Manager who stays with the job. Stock availability is live from our and partner warehouses. Send a Request a quote online and expect a quick reply, usually within 1 hour. Fast Order Placement by EAN/MPN keeps your ERP clean. Download Price Lists anytime for current revisions. Track builds with Lead Time Tracking and consult Purchase History Access to rationalise rail sizes and finishes across sites. Post-Payment for Trusted Clients offers up to 30 days where eligible. Use Consolidated Order Management to group ready lines and cut freight, with Smart Delivery Cost Estimates shown at order and confirmed before dispatch. We maintain Stable Prices With Validity Dates so phased works remain predictable.