RZB Industrial lights

RZB builds rugged luminaires for halls, lines, and outdoor plant where dust, vibration, and temperature swings are routine. The portfolio keeps optics, drivers, and accessories consistent across families so installers can standardize on a small set of parts without sacrificing performance.

rzb industrial luminaires range and mounting

The core offer spans high-bays and continuous linear for tall aisles, sealed utility bodies for damp rooms, and projector floods for perimeters. Outputs run from 6,000 to 40,000 lm with beam sets at 20°/40°/60°/90° plus batwing aisle distributions. Mounting heights of 8–18 m are supported with hooks, pendants, or rigid brackets; continuous trunking comes in 1.2/1.5/1.8 m modules with tool-free gear trays. Where the brief calls for quick commissioning, specifiers often package linears and high-bays as rzb factory luminaire systems so optics, feeds, and controls land on site in one coordinated kit.

Product range and series overview

High-bay families handle the main halls; sealed linears maintain vertical illuminance on racking and resist airflow contaminants; utility bulkheads tie plant rooms and stair cores into the same monitoring backbone. Projector floods cover gantries, yards, and loading aprons with symmetric and forward-throw optics. Emergency-ready variants support 1 h or 3 h operation (self-contained or central-battery) without changing the mechanical footprint.

Technical specifications and standards

Electrical architecture is 220–240 V AC, 50/60 Hz with drivers targeting PF ≥ 0.95 and THD ≤ 10–15 %. Efficacy typically sits at 130–170 lm/W depending on optic and finish. Standard color quality is CRI 80 with CRI 90 for inspection zones; CCT options 3000 K, 4000 K, and 5000 K cover warm production, neutral logistics, and cold-store acuity. Lifetime ratings of L80/B10 50,000–100,000 h are supported by LM-80/TM-21 data; specify Ta explicitly when racking narrows convection. Inrush and surge are engineered for industrial feeders (common values 6 kV L–N, 10 kV common mode). Construction aligns to EN/IEC 60598 families; photometric files ship in IES/LDT for planning.

rzb IP-rated fixtures protection and durability

Ingress protection reaches IP65/IP66 on sealed housings for dust, washdown, and wind-borne moisture, with IP67 on selected floods used near equipment decks. Impact classes up to IK10 are available where trolleys or hooks can strike the lens; optical faces in PC or PMMA are chosen against cracking and UV shift. Silicone or EPDM gaskets with pressure-equalizing vents limit seal stress under thermal cycling; pluggable IP66 connectors and through-wiring keep open-housing time short during install and maintenance — the practical difference is real on ladder work.

Applications and compatibility

For rzb warehouse lighting, aim for uniform verticals on the first two rack levels and stable line-of-sight to scanner labels. High-bays with narrow beams suit tall aisles; sealed linears with aisle optics reduce spill while lifting vertical lux. Cold stores benefit from sealed bodies rated down to −30 °C and drivers validated for low-temperature start. On production lines, flicker-controlled drivers keep cameras and sensor gates happy; glare management at 8–12 m mounting avoids masking machine indicators. Loading docks and aprons call for asymmetric floods that push light forward with cut-off to control spill onto adjacent properties.

Integration with other brand products

Linears, high-bays, and floods share control choices, so DALI-2 grouping and emergency reporting remain consistent from halls to stair cores. Exit signs and emergency downlights use the same test concepts, which simplifies function and duration routines across buildings. If the site runs BMS alarms, driver status and emergency self-test results can be exposed on the same backbone for faster audits.

rzb outdoor industrial lighting areas and optics

Perimeter roads, pipe racks, and open yards need forward-throw distributions to reach roadway edges without glare on operators. Choose cut-off packages that hold peak candela below critical viewing angles and keep backlight inside the fence. Mounting options include pole, wall, and truss brackets; powder-coat systems and fasteners are selected for damp or semi-coastal environments, so finish integrity matches the electrical life.

Selection criteria for B2B clients

Pick the optic by mounting height and task: 20–40° for long throws and tall aisles, 60–90° or batwing where racks are closer or ceilings lower. Confirm Ta class early; sealed bodies give IP confidence but need honest thermal margins if cable ladders restrict airflow. Plan feeds for inrush and voltage drop on long runs; C-curve MCBs are common on dense layouts. Where collision risk is present, specify IK08–IK10 faces and shrouds; in damp zones, keep connector families consistent to reduce spares.

Advantages of working with Bankoflamps

You get itemized B2B pricing tied to the actual bill of materials, a single account manager who handles quotes and substitutions, and real-time EU stock visibility before sign-off. Most quotations land in about an hour. Orders by EAN/MPN keep ERP clean; price lists are downloadable and kept current for tender packs. We provide lead-time and order-status tracking with phase tags, purchase-history analytics to consolidate SKUs, and — for trusted clients — post-payment terms up to 30 days. Consolidated shipments reduce freight on multi-site drops, pricing carries clear validity windows, and we actively support teams in France, the Baltics, Germany, Spain, Italy, Belgium, and the Netherlands.