Wireless shading actuator

Wireless shading element and roller shutter actuator 2+2 NO contact 4A/36V DC, not potential free, for a shading element motor 12-36 V DC. Standby loss only 0,8 watt. For installation. 49x51mm, 23mm deep. The terminals are plug-in terminals for conductor cross-sections of 0.2mm2 to 2.5mm2. The convenient tap technology permits the teach-in of wireless universal pushbuttons, wireless direction push­buttons and wireless central control pushbuttons. It is possible to select between the functions GR, GS1, central pushbutton with or without priority, or GS2, central pushbutton without priority, with double-click reversal function or tap changeover function. Bidirectional wireless and repeater function can be enabled. Supply voltage, switching voltage and control voltage local 12-36V DC. If supply voltage fails, the device is ­switched off in defined mode. In addition to the wireless control input via an internal antenna, this wireless actuator can also be controlled locally by a conventional control switch if fitted previously. Control is either by separate local control inputs for Up and Down as direction pushbuttons or these two inputs are bridged and controlled by single pushbuttons as universal pushbuttons. A change in direction then takes place by interrupting activation. On request the independent IP address permits remote access over the internet as the device is an IoT product of the latest generation. Bluetooth is also incorporated. When operated in offline mode, Wi-Fi, Bluetooth and EnOcean can be completely disabled. Future firmware updates can be loaded per Wi-Fi via smartphone or the internet. All settings can be backed up and then loaded to other actuators of the same type as required. This actuator is Apple-certified and can therefore be taught-in to Apple HomeKit. It can also be taught-in to actuators in Google Assistant, Amazon Alexa and other systems after a firmware update. It is equipped with a power measurement IC to measure the consumers connected. The Eltako app makes setting, triggering and controlling Smart Home functions by smartphone much faster and simpler.