standard auxiliary contact, circuit breaker status OF/SD/SDE/SDV, 1 changeover contact type, screwless spring terminals
В наличии: Да
Запасы поставщика: Да
Минимальное количество заказа: 1
Эта цена действительна до 31.12.25 или пока товар есть в наличии
Ориентировочное время доставки на наш склад (приблизительно):
По запросу
Technical Information
Состояние товара |
Новый |
Название производителя |
standard auxiliary contact, circuit breaker status OF/SD/SDE/SDV, 1 changeover contact type, screwless spring terminals |
Бренд |
Schneider Electric
|
Категории |
Signal & Control Modules
|
Страна происхождения |
CN |
Код гармонизированной системы |
8536 5080 00
|
Способ крепления |
Другое |
Модель |
Встроенный |
Номинальный рабочий ток Ie при AC-15, 230 В |
4 A |
Тип электрического соединения |
Соединение с пружинным зажимом |
Количество контактов как нормально закрытый контакт |
0 |
Количество контактов как нормально разомкнутый контакт |
0 |
Количество контактов в качестве переключающего контакта |
1 |
Сведения об упаковке
Уровень упаковки 1 |
3303430294504 |
Уровень упаковки 2 |
3303430294501 |
Уровень упаковки 3 |
3303430294502 |
Другие технические данные
Подставка для лампы |
Нет |
Количество переключателей сигнализации неисправности |
1 |
Загрузки
Описание
It is a single standard auxiliary contact that provides all the different indications remotely for ComPact NSX, ComPact NS, PowerPact Multistandard and EasyPact CVS circuit breakers. Remote status information are ON/OFF (OF), trip indication (SD) and fault-trip indication (SDE) for all circuit breakers types. The remote status information for trip indication due to an earth fault (SDV) is used for ComPact NSX and PowerPact Multistandard. The contacts are installed in the device in dedicated slots. This auxiliary contact is a common point changeover type contact with 1 normally open contact and 1 normally closed contact. The rated current is 6A and the minimum load is 100mA at 24 VDC for utilization categories are AC12/AC15/DC12/DC14. Screwless connections with spring terminals provide a fast and reliable connection. The section of connected cables is between 0.5 mm² (AWG20) and 1.5 mm² (AWG16). It complies with IEC 60947-5-1 standard.