Technical Information
| Состояние товара |
Новый |
| Название производителя |
SIPLUS S7-1500 DQ 16x24VDC/0.5A HF |
| Бренд |
Siemens
|
| Категории |
PLC Units & I/O Modules
|
| Страна происхождения |
DE |
| Код гармонизированной системы |
8538 9091 00
|
| Количество цифровых входов |
0 |
| Количество цифровых выходов |
16 |
| Тип напряжения питания |
DC |
| Выходной ток |
0.5 A |
| Тип цифрового выхода |
Транзистор |
| Напряжение питания постоянного тока |
20.4-28.8 V |
| Допустимое напряжение на выходе |
0-28.8 V |
| Конфигурируемые цифровые входы |
No |
| Конфигурируемые цифровые выходы |
Yes |
Сведения об упаковке
| Уровень упаковки 1 |
4047618071127 |
Другие технические данные
| Ширина |
35 mm |
| Высота |
147 mm |
| Глубина |
129 mm |
| Входной ток при сигнале 1 |
0 mA |
| Подходит для функций безопасности |
No |
| Задержка при обмене сигналами |
0.1 ms |
| Избыточность |
Yes |
| Защита от короткого замыкания, доступные выходы |
Yes |
| Категория взрывобезопасности по пыли |
Нет |
| Дополнительный операционный агент (Ex ia) |
No |
| Дополнительный операционный агент (Ex ib) |
No |
| Тип выходного напряжения |
DC |
Описание
SIPLUS S7-1500 DQ 16x24VDC HF TX rail based on 6ES7522-1BH01-0AB0 with conformal coating, -40…+70 °C, OT4 with ST1/2 (+85 °C for 10 minutes), digital output module, 16 channels in groups of 8; 4 A per group; single-channel diagnostics; substitute value SIMATIC ET 200MP is a modular and scalable I/O system with IP20 for universal use, and offers the same system advantages as the S7-1500. It permits the shortest bus cycle times and fastest response times, even with large volumes of data. The distributed I/O system is particularly easy to install, wire, and commission. Thanks to its scalable design, you can gear the IO station exactly to the on-site requirements. Just like the CPU, the digital output modules are also protected against extreme ambient conditions. Due to the 100% conformal coating they can withstand biologically, chemically and physically active substances, condensation, frost, and corrosive gases. Regardless of the conditions, your digital signals are reliably output.