Technical Information
| Состояние товара |
Новый |
| Название производителя |
SIPLUS S7-1500 AI 8xU/I HS |
| Бренд |
Siemens
|
| Категории |
PLC Units & I/O Modules
|
| Страна происхождения |
DE |
| Код гармонизированной системы |
8538 9091 00
|
| Количество аналоговых входов |
8 |
| Количество аналоговых выходов |
0 |
| Вход, ток |
Yes |
| Входной сигнал, конфигурируемый |
Yes |
| Выходной ток |
No |
| Выход, напряжение |
No |
| Выходной сигнал настраиваемый |
No |
| Разрешение аналоговых входов |
16 Bit |
| Разрешение аналоговых выходов |
0 Bit |
| Аналоговые входы настраиваются |
Yes |
| Аналоговые выходы настраиваются |
No |
Сведения об упаковке
| Уровень упаковки 1 |
4047618085612 |
Другие технические данные
| Ширина |
35 mm |
| Высота |
147 mm |
| Глубина |
129 mm |
| Подходит для функций безопасности |
No |
| Входное напряжение |
Yes |
| Вход, резистор |
No |
| Вход, термометр сопротивления |
No |
| Вход, термопара |
No |
| Категория взрывобезопасности по пыли |
Нет |
| Дополнительный операционный агент (Ex ia) |
No |
| Дополнительный операционный агент (Ex ib) |
No |
Описание
SIPLUS S7-1500 AI 8xU/I HS TX rail based on 6ES7531-7NF10-0AB0 with conformal coating, -40…+70 °C, OT4 with ST1/2 (+85 °C for 10 minutes), analog input module 16-bit resolution, accuracy 0.3%, 8 channels in groups of 8, common mode voltage 10 V; diagnostics; hardware interrupts 8 channels in 0.0625 ms including infeed element, shielding bracket and shield terminal SIMATIC ET 200MP is a modular and scalable I/O system with IP20 for universal use, and offers the same system advantages as the S7-1500. It permits the shortest bus cycle times and fastest response times, even with large volumes of data. The distributed I/O system is particularly easy to install, wire, and commission. Thanks to its scalable design, you can gear the IO station exactly to the on-site requirements. Just like the CPU, the analog input modules are also protected against extreme ambient conditions. Due to the 100% conformal coating they can withstand biologically, chemically and physically active substances, condensation, frost, and corrosive gases. Regardless of the conditions, your analog signals are reliably recorded.