Technical Information
| Состояние товара |
Новый |
| Название производителя |
SIMATIC S7-1500 digital input/output module, DI16x 24VDC BA, 16 channels in groups of 16, input |
| Бренд |
Siemens
|
| Категории |
PLC Units & I/O Modules
|
| Страна происхождения |
DE |
| Код гармонизированной системы |
8538 9091 00
|
| Количество цифровых входов |
16 |
| Количество цифровых выходов |
16 |
| Тип напряжения питания |
DC |
| Выходной ток |
0.5 A |
| Тип цифрового выхода |
Транзистор |
| Напряжение питания постоянного тока |
19.2-28.8 V |
| Допустимое напряжение на выходе |
0-28.8 V |
| Конфигурируемые цифровые входы |
Yes |
| Конфигурируемые цифровые выходы |
Yes |
Сведения об упаковке
| Уровень упаковки 1 |
4047623402312 |
Другие технические данные
| Ширина |
25 mm |
| Высота |
147 mm |
| Глубина |
129 mm |
| Входной ток при сигнале 1 |
2.7 mA |
| Подходит для функций безопасности |
No |
| Задержка при обмене сигналами |
1.2-4.8 ms |
| Тип напряжения (входное напряжение) |
DC |
| Избыточность |
No |
| Защита от короткого замыкания, доступные выходы |
Yes |
| Категория взрывобезопасности по пыли |
Нет |
| Дополнительный операционный агент (Ex ia) |
No |
| Дополнительный операционный агент (Ex ib) |
No |
| Допустимое напряжение на входе |
-30-30 V |
| Тип выходного напряжения |
DC |
Описание
SIMATIC S7-1500 digital input/output module, DI16x 24VDC BA, 16 channels in groups of 16, input delay typ. 3.2 ms input type 3 (IEC 61131), DQ16XDC 24V/0.5A BA; 16 channels in groups of 8; 4 A per group; the module supports the safety-oriented shutdown of load groups up to SIL2 according to EN IEC 62061:2021 and Category 2 / PL c according to EN ISO 13849-1:2015. delivery including front connector push-in, SIMATIC ET 200MP is a modular and scalable I/O system with IP20 for universal use, and offers the same system advantages as the S7-1500. It permits the shortest bus cycle times and fastest response times, even with large volumes of data. The distributed I/O system is particularly easy to install, wire, and commission. Thanks to its scalable design, you can gear the IO station exactly to the on-site requirements. The scalable configuration of an ET 200MP station is ensured by the wide range of signal modules. A large number of digital and analog input and output modules are available. This ensures the universal applicability of the system.