Датчик присутствия Standard для KNX цвет: чисто-белый, KNX среда: TP256, угол обнаружения: 360°

Presence detector Standard for KNX pure white Presence detector for presence monitoring (operating mode: presence detector), for motion detection (operating mode: ceiling security light) or for monitoring with alarm telegrams (operating mode: alarm device) indoors. Features: Flush-mounted device with integrated KNX bus coupler. Programming LED button is visible and can be operated when installed if the ornamental ring is removed. PIR sensors: three sensors (crossed light paths), integrated brightness sensor. Adjuster for manual correction of sensitivity. Sensitivity is configurable. Sensitivity adjuster on the device can be deactivated using the software. Indication of motion detection (permanent or only during walking test). One function block configurable. Indication of motion detection (permanent or only during walking test). Adjustable operating mode: ceiling security-light, presence detector, alarm device. Individual device, main unit, auxiliary unit can be set. Operating mode for individual device or main unit: automatic, semi-automatic (manual ON automatic OFF, or automatic ON manual OFF). Two outputs (for function: ceiling security-light, presence detector). Output (for function: ceiling security-light, presence detector): switching, staircase function, switching with forced setting, dimming value transmitter, light scene auxiliary unit, temperature value transmitter, brightness value transmitter, temperature operating mode. Twilight stage can be set using external communication object or teach-in. Additional transmission delay via external communication object. Adaptive delay time (self-teaching additional transmission delay) Short-term presence function. Feedback of twilight stage. Block function. Manual actuation using pushbutton sensor (separate communication object). Switch-off brightness (for presence detectors) via teach-in. Measurement of time period after last motion. Notes : The presence detector is not suitable for alarm messages in VdS-compliant alarm systems. Ceiling mounting on stable ceilings in device box or surface-mounted housing.