Post-top luminaires Publisca P3 CLO (normal) Lens Anthracite ETDD 66W 6800lm 70 asymmetric wide (AB2L) IP66 IK08 5 SDCM 7641751

Decorative lateral post-top luminaire with flat cover. With an intelligent label for quick access to luminaire information by means of QR code. With connected 6,000 mm connection cable. With power reduction via control circuit. Switching off a control circuit causes the luminaire luminous flux to be set to 50%. Post-top luminaire for post spigot Ø 76 mm, Mast mounting via two stainless steel fixing screws in accordance with EN 60598-2-3. Also suitable for mounting to posts with spigot Ø 60 mm via reduction pieces to be ordered separately. Passender Mast auf Anfrage. Optical system with Multi-Lens Technology. Luminaire optic consists of highly efficient, UV and temperature-resistant lens systems. With asymmetric wide light distribution. Optimised for horizontal positioning of luminaire body. Further beam characteristics are available for flexible adaptation to customer-specific lighting tasks. Retrofitting a rear / side shield is possible as an accessory to be ordered separately. Luminaire luminous flux and light color fixed, with luminous flux stabilization at end of life (CLO). With 6 LED modules. LED module consisting of four LEDs including optical system. Luminaire luminous flux 3200 lm - 6800 lm, connected load 63 W - 66 W, maximum luminous efficiency of luminaire 103 lm/W. Light colour warm white, correlated colour temperature (CCT) 3000 K, general colour rendering index (CRI) Ra > 70. Colour locus tolerance (initial MacAdam) ≤ 5 SDCM. Further LED light colours available on request. Mean rated service life LCLO(tq 25 °C) = 100,000 h. The light source is replaceable according to the ecodesign requirements (VO (EU) 2019/2020). Luminaire body of die-cast aluminium. Surface anthracite coated (DB 703). Sea weather-suitable coating on request. Cover of heat-treated non-laminated safety glass. Cover sealed in luminaire body. With a transmission value of > 98%. Safety class (EN 61140): II, protection rating (DIN EN 60529): IP66, impact resistance level in accordance with IEC 62262: IK08. Mast available upon request. Windage area fw 0,040 m2. Weight: 11,0 kg. Gear tray with all electrical components and LED modules mounted as upper luminaire enclosure. Removable after releasing four fixing screws of V2A. With operating device, digitally dimmable (DALI). Control gear unit according to DALI-2 standard (EN 62386). The control gear unit is replaceable in accordance with the ecodesign requirements (VO (EU) 2019/2020). Surge voltage resistance Differential Mode / Common Mode: 6 kV / 10 kV. The luminaire complies with the fundamental requirements of applicable EU regulations and product safety legislation and bears the CE symbol. The luminaire is also ENEC-certified by an independent testing authority. Luminaire available for 10 years, spare parts (LED module, control gear unit, optical system) for 15 years from date of invoice, subject to reasonable modifications in the interests of progress.