Post-top luminaires Jovie 70 CLO (normal) Lens Anthracite ET 56W 6800lm 70 asymmetric wide (AB7L) IP66 IK09 5 SDCM 7522640

Versatile outdoor post luminaire in minimalist, international design with flat construction. With an intelligent label for quick access to luminaire information by means of QR code. With power reduction via control circuit. Switching off a control circuit causes the luminaire luminous flux to be set to 50%. To be used as a post-top luminaire (spigot measurement Ø76 mm/ Ø60 mm, Jovie Z MB D.) or bracket-mounted luminaire (spigot measurement Ø42 mm/ Ø60 mm, Jovie A Z MB D...) in combination with the post fixing to be ordered separately.. The inclination of the luminaire head can be adjusted. Inclination angle for bracket-mounting o°, -5°, -10°, Inclination angle for post-top mounting 0°, 5°, 10°, 15°. As MLT version (Multi-Lens Technology), consisting of highly efficient UV and temperature-resistant lens systems in 4-fold configurations. With asymmetric wide light distribution. For road illumination in compliance with M5 and M6 lighting classes with road width to mounting height ratio of 0.4 to 0.8. Further beam characteristics are available for flexible adaptation to customer-specific lighting tasks. Luminaire luminous flux and light color fixed, with luminous flux stabilization at end of life (CLO). LED system consists of 8 MLT LED modules each with 4 LEDs. Luminaire luminous flux 6800 lm - 6800 lm, connected load 53 W - 56 W, maximum luminous efficiency of luminaire 128 lm/W. Light colour neutral white, correlated colour temperature (CCT) 4000 K, general colour rendering index (CRI) Ra > 70. Colour locus tolerance (initial MacAdam) ≤ 5 SDCM. Further LED light colours available on request. Mean rated service life LCLO(tq 25 °C) = 100,000 h. The light source is replaceable according to the ecodesign requirements (VO (EU) 2019/2020). Luminaire with adjustable luminaire luminous flux, reduction up to 50%, via app and NFC (Near Field Communication). The upper limit value of the luminaire is set in the delivery state. Luminaire body of die-cast aluminium. Surface anthracite coated (DB 703). Luminaire housing highly weather resistant, powder-coated. Sea weather-suitable coating on request. With PMMA cover, printed. The cover can be individually printed on customer request. Visible label protected against weather impact behind the cover on request. Safety class (EN 61140): II, protection rating (DIN EN 60529): IP66, impact resistance level in accordance with IEC 62262: IK09. Mast available upon request. Windage area fw 0,220 m2. Weight: 9,9 kg. The luminaire is connected without opening the luminaire body by means of the connection cable routed to the outside. Length of connection cable: 12,0 m. With electronic transformer, switchable. Control gear unit according to DALI-2 standard (EN 62386). The control gear unit is replaceable in accordance with the ecodesign requirements (VO (EU) 2019/2020). Surge voltage resistance Differential Mode / Common Mode: 6 kV / 10 kV. The luminaire complies with the fundamental requirements of applicable EU regulations and product safety legislation and bears the CE symbol. The luminaire is also ENEC-certified by an independent testing authority.