- Главная /
- Светильники /
- Светодиодные ленты, модули, профили и аксессуары /
- Легкая лента/шланг/полоска /
- LED strip 5630, DC12V, 300LED/5m, 16 W/m, 1750 lm/m, 4000K, IP20, roll 50 m
- Главная /
- GTV Lighting /
- LED strip 5630, DC12V, 300LED/5m, 16 W/m, 1750 lm/m, 4000K, IP20, roll 50 m
- Главная /
- GTV Lighting +
- Светильники /
- GTV Lighting Светильники +
- Светодиодные ленты, модули, профили и аксессуары /
- GTV Lighting Светодиодные ленты, модули, профили и аксессуары +
- Легкая лента/шланг/полоска /
- LED strip 5630, DC12V, 300LED/5m, 16 W/m, 1750 lm/m, 4000K, IP20, roll 50 m
LED strip 5630, DC12V, 300LED/5m, 16 W/m, 1750 lm/m, 4000K, IP20, roll 50 m
Technical Information
| Состояние товара | Новый |
| Название производителя | LED strip 5630, DC12V, 300LED/5m, 16 W/m, 1750 lm/m, 4000K, IP20, roll 50 m |
| Бренд | GTV Lighting |
| Категории |
Легкая лента/шланг/полоска
|
| Степень защиты (IP) | IP20 |
| Цветовая температура | 4000 K |
Сведения об упаковке
| Уровень упаковки 1 | 5902801358470 |
| Уровень упаковки 2 | 5902801358173 |
| Уровень упаковки 3 | 2012801400826 |
| Уровень упаковки 4 | 2012801400888 |
Загрузки
Описание
The current trend is to move away from light points in favor of linear lighting, which is based on LED strips.
LED strips are popular due to their low price and proven quality. Of course, their reliability largely depends on carefully carried out assembly.
During operation, the belt generates heat that must be dissipated from it. Otherwise, the tape may wear out prematurely. Special aluminium GLAX profiles are used to dissipate heat from the belt. In order to effectively dissipate heat from the tape to the aluminum profile, the tape must adhere to it with its entire surface. Therefore, before pasting the LED strip into the GLAX profile, it is necessary to degrease its center.
LED strips find a wide range of applications both in homes and office spaces. You can use them to illuminate the kitchen, dressing room, reception, showcases and even walls and ceilings.
LED strip 5630 for 1 meter of its length consumes only 16 W. The tape can be cut every 5 cm, remembering that the cut should be made in a specially marked place.
An important parameter of LED strips is the density of the arrangement of diodes. The more densely they are arranged, the more even the line of light we get. In this case, 300 diodes are arranged along the entire length of the tape, i.e. 60 / m.
You should also pay attention to the width of the LED strip to be able to paste it into the profile without any problems. This index is 10 mm wide.
50-meter rolls allow you to optimize your inventory levels. By using only as much tape as is needed, waste in the form of unusable strips of tape is prevented.
- The most popular light colour on the market: neutra