Technical Information
| Состояние товара |
Новый |
| Название производителя |
Wireless Powernet phase coupler |
| Бренд |
ELTAKO
|
| Категории |
Bus System Devices (KNX/Modbus)
|
| Страна происхождения* |
CN |
|
* The actual country of origin may differ depending on the delivery batch.
To confirm the specific country of origin, please contact your account manager.
|
| Код гармонизированной системы |
8526 9200 00
|
| Номинальное напряжение |
230 V |
| Способ крепления |
DRA (адаптер для установки на DIN-рейку) |
| Количество фаз |
3 |
| Шинная система KNX |
No |
Сведения об упаковке
| Уровень упаковки 1 |
4010312311769, 4010312311769 |
| Уровень упаковки 2 |
4010312311769 |
| Уровень упаковки 3 |
4010312311769 |
Другие технические данные
| Шинная система радио частая |
Yes |
| Шинная система Powernet |
Yes |
| Ширина в количестве модульных интервалов |
1 |
| Другие автобусные системы |
Другое |
| Шинная система LON |
No |
| Шинная система Радио KNX |
No |
Загрузки
Описание
Wireless Powernet phase coupler to transmit wireless telegrams over the 230V power mains. Only 0.2 watt standby loss. Modular device for DIN-EN 60715 TH35 rail mounting. 1 module = 18mm wide, 58mm deep. Voltage between the two outer conductors: 400V/50Hz. Frequency range 115-132kHz. The phase coupler increases the capacitive coupling between 2 different outer conductors if, for example, the cables within the installation are not laid in parallel at a distance of at least several metres apart (as ribbon cables or jacketed cables). Caution: The phase coupler may only be connected to the input side of the line circuit-breaker.