Technical Information
| Состояние товара |
Новый |
| Название производителя |
Wireless Powerline tunnel gateway |
| Бренд |
ELTAKO
|
| Категории |
Bus System Devices (KNX/Modbus)
|
| Страна происхождения |
CN |
| Код гармонизированной системы |
8526 9200 00
|
| Способ крепления |
DRA (адаптер для установки на DIN-рейку) |
| Модель |
Радиоинтерфейс в зависимости от производителя |
| Шинная система KNX |
No |
| Шинная система Powernet |
Yes |
| Ширина в количестве модульных интервалов |
2 |
| Другие автобусные системы |
Нет |
Сведения об упаковке
| Уровень упаковки 1 |
4010312317723, 4010312317723 |
| Уровень упаковки 2 |
4010312317723 |
| Уровень упаковки 3 |
4010312317723 |
Другие технические данные
| Тип напряжения |
DC |
| Потребляемая мощность |
0.4 W |
| Шинная система радио частая |
Yes |
| Шинная система LON |
No |
| Защита от демонтажа |
No |
| Радиоинтерфейс |
Yes |
| ИК-интерфейс |
No |
| Протокол |
Другое |
| Зависит от провайдера |
No |
| Обновляемый |
No |
| Визуализация |
Yes |
| Веб сервер |
No |
| Рабочее напряжение |
12 V |
| со светодиодной индикацией |
Yes |
| Шинная система Радио KNX |
No |
| Радио частый двунаправленный |
Yes |
Загрузки
Описание
Wireless Powerline tunnel gateway. Uni- and bidirectional. Standby loss only 0.4 watt. Modular device for DIN-EN 60715 TH35 rail mounting. 2 module = 36mm wide, 58mm deep. Supply voltage 230V. Connection to the Eltako-RS485 bus. Bus cross wiring and power supply with jumper. This gateway transmits RS485 bus telegrams over powerline with large distance over the electrical net. Minimum 2 pcs FPLT14 are required. Up to 10 FPLT14 can unidirectionally send the bus telegrams of their FAM14 / FTS14KS installation with Powerline to another FAM14/FTS14KS installation via a local FPLT14. Teach-in up to 120 telegram IDs according to the operating instructions, also with PCT14. Two FPLT14 can exchange the bus telegrams bidirectionally from 2 FAM14/FTS14KS installations with Powerline via the installed wires. Teach-in up to 120 telegram IDs according to the operating instructions, also with PCT14. Because of the transmission delay, short-click evaluations for FUD and FSB actuators are not possible.