Technical Information
| Состояние товара |
Новый |
| Название производителя |
Analog input 2 way |
| Бренд |
EATON
|
| Категории |
Bus System Devices (KNX/Modbus)
|
| Страна происхождения |
CZ |
| Код гармонизированной системы |
8541 4900 00
|
| Шинная система KNX |
No |
| Шинная система радио частая |
Yes |
| Шинная система Powernet |
No |
| С автобусным сообщением |
Yes |
| Другие автобусные системы |
xComfort |
| Шинная система LON |
No |
| Шинная система Радио KNX |
No |
Сведения об упаковке
| Уровень упаковки 1 |
4015081117987 |
| Уровень упаковки 2 |
9008790091148 |
Другие технические данные
| Способ крепления |
Другое |
| Модель |
Базовый модуль |
| Количество входов |
2 |
| Входной ток привода |
Yes |
| Привод входного напряжения |
Yes |
| Ширина в количестве модульных интервалов |
2 |
| Степень защиты (IP) |
IP20 |
| со светодиодной индикацией |
Yes |
| Мин. глубина встроенной монтажной коробки |
0 mm |
Описание
The 2-fold analog inputs can record different measurement values (e.g.: air quality, humidity, wind direction, etc.) using universal sensors (0-10VDC, 0-20mA, 4-20mA) or the temperature (PT1000 sensor, 265643) and provide the comfortable electrical installation. The supply is carried out via a separate 24VDC power supply unit (110772 or 110773, not included as standard!!!). The 24VDC supply is fed through 2-fold at the analog input and is therefore available for supplying the active sensors. depending on the sensors connected, the correct settings must be carried out for each channel. Notice: check the load and correct supply of the sensors!!! Notice: for the precise measurement and displaying of the values, use a reference measuring device to record the offset and adjust the zOffsetz in MFR. The device is mounted in the junction or installation box. Attention!: Does not work with xComfort Bridge