Profile GLAX rod for LED strip, 2 m

The current trend is to move away from light points in favor of linear lighting, based on LED strips.

During operation, the belt generates heat that must be dissipated from it. Otherwise, the tape may wear out prematurely. Special aluminium GLAX profiles are used to dissipate heat from the belt. In order to effectively dissipate heat from the tape to the aluminum profile, the tape must adhere to it with its entire surface. Therefore, before pasting the LED strip into the GLAX profile, it is necessary to degrease its center.

This profile is usually used as a replacement for the standard bar in wardrobes and wardrobes, performing a dual function. Thanks to its construction, it is durable enough to carry the weight of suspended clothes. At the same time, after installing the LED strip, it illuminates the interior of the cabinet, eliminating the need for an additional light source. During installation, care must be taken to ensure that the light beam is directed upwards.

When installing a rod profile in the cabinet, we have a choice of two rosettes: standard and premium. In the standard rosette you can see the screw heads fastening it to the body, while in the premium rosette the screw is hidden in the middle.

The rod profile can also be mounted to the ceiling with cables. One end is screwed to the ceiling, and the other is embedded in a special groove in the profile.

• Effectively dissipates the heat generated by the LED strip;
• Dedicated milk casing PA-OSMLGLAX-00;
• Dedicated transparent casing PA-OSTRGLAX-00;
• Standard rosette PA-ROZGLAX-53;
• Premium rosette PA-ROZGLAXP-53;
• Cap (only for cable mounting) PA-ZASGLAXDR-00;
• Suspension rope 1,5 m (1 pcs) PA-ZAWGLAXDR-00;
• The maximum width of the LED strip is 12 mm.