Cat.8.1 class I RJ45 plug to be assembled in the field (up to 2000 MHz), fully shielded and multi-port capable, variable (360°) cable feed, freely selectable, easy assembly - connection without special tools, wire connection: stranded wire AWG 27/7 to 22/7, wire diameter from 0.43 to 0.76 mm, wire connection: solid wire AWG 26/1 to 22/1, wire diameter from 0.409 to 0.64 mm, transmission characteristics Cat.8.1 according to ISO/IEC 11801 (up to 2000 MHz), compliance with class I according to ISO/IEC 11801, DIN EN 50173-1, suitable for 40GBASE-T 40 GBit Ethernet (IEEE 802.3bq), Remote Powering (PoE, PoE plus, UPoE and 4PPoE) and HDBaseT, degree of protection IP20, for cable jacket diameter from 5.5 to 10.5 mm, zinc die-cast housing for industrial use consists of only 2 parts, strain relief by latching clip directly on the stuffer cap, protected locking hook, reconnectable