ELPA 8 staircase time switch VDE

Name: ELPA 8 staircase time switch VDE
Brand: Theben
Price: 26.950 EUR
Availability: PreOrder

Order only

Price (excl. VAT):

26,95 €

This price is valid until 31.12.25

EAN: 4003468010068

MPN: 0080002

Package: 1

Box: 10

Estimate delivery time at our warehouse (approx.): 2-4 weeks

Technical Information

Item condition	New
Manufacture name	ELPA 8 staircase time switch VDE
Brand	Theben
Categories	Marking Plates and Enclosures
Country of origin	DE
Harmonized System Code	8531 1030 00
Mounting method	DIN rail
Function	Mechanical
Release-delay	0.5-7 min
Control voltage 1	230 V
Type of control voltage 1	AC
Frequency control voltage 1	50 Hz
Wiring system	3 and 4 wire configuration
Pre-warning of switching-off	None
Repetitive	Repetitive
Voltage type of supply voltage	AC
Supply voltage	207-253 V
Max. incandescent lamp load	2300 W
Max. load fluorescent lamp	2300 VA
Rated switch current	16 A
Current surge function selectable	No

Packing details

Packing level 1	4003468010068
Packing level 2	4003468010068
Packing level 3	4003468010068

Other Technical data

Built-in depth	60 mm
Width in number of modular spacings	1
Max. switching current (cos phi = 0.6)	10 A
Max. load fluorescent lamp (Duo circuit)	2300 VA
Max. load fluorescent lamp (parallel compensated)	1300 VA
Push button glow-lamp current	50 mA
Number of contacts as normally closed contact	0
Number of contacts as normally open contact	1
Number of contacts as change-over contact	0

Description

This component is a control accessory designed for electrical systems, ensuring signal integrity and reliable input/output performance. It primarily facilitates the transmission, conversion, or management of control signals in automation environments. ### Electrical Specifications Operates on standard low-voltage DC circuits. Rated input voltage must match system requirements — refer to data sheet for tolerances. Optimized for consistent signal relay without distortion or drop-off, depending on load conditions. ### Mechanical Compatibility Mountable within DIN rail configurations conforming to industry-standard sizing. Compatible with enclosures protecting against variable environmental conditions such as thermal fluctuation or moisture exposure—IP rating dependent on applied housing. ### Regulatory Conformities Manufactured under compliance to relevant IEC certifications regarding electromagnetic interference (EMI) and operational safety protocols related to industrial controls. #### Technical Notes / Limitations: - Maximum operating temperature: 55°C; avoid placement near high-heat sources. - Not rated for outdoor unprotected use; consider additional weatherproofing measures. - Signal response latency varies by condition but stays within ±5 ms nominal range. - Never exceed recommended current load, risk of permanent damage possible. - Requires grounding per specification guidelines — improper installation may void warranty.